Page 1 of 1

CP ERROR CODE

Posted: Tue Jun 27, 2017 2:14 pm
by yardbirdjr
Hello all!

I need a little help

I have a VHF CP200XLS and I can read the radio fine with CPS.

When I go to write to the radio the CPS gives me the following error code.

The ERROR CODE is 2440

It says something about narrowbanding. I have all the channels set to 12.5 but the radio still will not program.

The same thing happens with my UHF CP200XLS as well.

Any help would greatly be appreciated

Thanks

David

Re: CP ERROR CODE

Posted: Tue Jun 27, 2017 6:47 pm
by SteveC0625
yardbirdjr wrote:Hello all!

I need a little help

I have a VHF CP200XLS and I can read the radio fine with CPS.

When I go to write to the radio the CPS gives me the following error code.

The ERROR CODE is 2440

It says something about narrowbanding. I have all the channels set to 12.5 but the radio still will not program.

The same thing happens with my UHF CP200XLS as well.

Any help would greatly be appreciated

Thanks

David
Go into the trunking section. Delete all but one of the repeaters, and then make sure that repeater is set to 12.5. Should fix it for ya.

Re: CP ERROR CODE

Posted: Tue Jun 27, 2017 11:15 pm
by yardbirdjr
Thanks

I will try that

David