Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

MIP5000 Audio Question

Discussion about Centracom (Button & LED / CRT / Gold / Elite), MC Series (MC5500/7100/7500), and legacy console equipment.

Moderator: Queue Moderator

celltech25
Posts: 503
Joined: Fri Apr 29, 2005 3:54 am

MIP5000 Audio Question

Postby celltech25 » Wed Jun 17, 2015 8:39 am

Have a 7 channel MIP5000 2 digital consolettes and the other 5 channels are tone

it is setup with primary channel on select speaker on digital 1 monitor speaker 1 is diagital 2,
mon spkr 2 is analog 1
mon spkr 3 is analog 2
mon spkr 4 is analog 3
and other 2 channels go to unselect speaker

the issue we are having is when we get 2 or more conversations at a time its almost impossible to understand, the audio from 1 channel at a time is pretty good but when more than 1 goes it doesnt work very well,

We had a old centracom button/led that worked great but took up the enitre room and finally bit the dust.

Any ideas on things to Check

miler
New User
Posts: 4
Joined: Tue May 05, 2015 12:06 pm

Re: MIP5000 Audio Question

Postby miler » Fri Jun 19, 2015 11:35 am

The issue is that, even though you have separated the channels onto different speakers, the audio will still mix in the room when played simultaneously on separate speakers. There is no way to separate simultaneous radio traffic in the same room. This leaves select audio and unselect audio to be set up the same way you would have on the centracom. It had no way to deal with monitoring simultaneuos conversation either.

acs680
New User
Posts: 13
Joined: Fri Mar 27, 2009 7:21 am

Re: MIP5000 Audio Question

Postby acs680 » Mon Jul 27, 2015 2:09 pm

It's been my experience that audio on the MIP leaves a lot to be desired. Our 3 remote PSAPs are using digital gateways, I can't imagine tone as it degrades the audio even more. We just switched from tone to e&m on our MCC5000 to improve audio (the MIP doesn't sound near as good as the MCC). But on top of that, having mutiple sources of sound at one time is almost impossible to process. In our 5 position center, if more than 2 channels are going at once you can forget it. If you haven't already done so, I would highly recommend acoustically treating the room and make it as dead as possible. This will help tremendously.

scoops
Posts: 69
Joined: Thu Sep 27, 2001 4:00 pm

Re: MIP5000 Audio Question

Postby scoops » Tue Feb 09, 2016 11:10 am

We found if more than one console has the same channel selected as primary, the audio sounds different


Return to “Consoles”

Who is online

Users browsing this forum: No registered users and 1 guest