Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Centracom II & II+ Part Numbers

Discussion about Centracom (Button & LED / CRT / Gold / Elite), MC Series (MC5500/7100/7500), and legacy console equipment.

Moderator: Queue Moderator

User avatar
d119
Posts: 3436
Joined: Tue Mar 19, 2002 4:00 pm

Centracom II & II+ Part Numbers

Postby d119 » Sun Feb 10, 2008 8:48 am

A list of part numbers and their descriptions relating to Centracom II / II+ Dispatch Consoles & CEB's

BLN1138 = Keypad board for B&L Radio Control Panel (RCP) Master control Panel (MCP)
BLN1145 = Dual Receive (DR) Module - two receive-only channels
BLN1148 = Headset Jack Box. "B" Rev = OSHA Audio Level Mod.
BLN1170 = Trunked Operator Multiplex Interface (TOMI, CC II+)
BLN1172 = Trunking Central Controller Interface (TIMI)
BLN1173 = Logging Operator Multiplex Interface (LOMI)
BLN1208 = AIMI (Ambassador Interface, replaces System Timer)
BKN6135 = "Y" Interface cable from backplane & AEI to OP position
BLN6617 = Numeric & Bargraph Display board for B&L RCP/MCP
BLN6622 = Operator Multiplex Interface (OMI, CC II)
BLN6631 = Channel Control Module (7-Button w/ volume pot.)
BLN6640 = Dual Channel Control Module (6-Button w/ 2 volume pots)
BLN6650 = System Timer (older card w/ potentiometer in front)
BLN6654 = Base Interface Module (BIM)
BLN6664 = 3/6 AUX I/O (3in 6out)
BLN6666 = Tone Line Operated Busy Light daughtercard
BLN6667 = BIM DC Control daughtercard
BLN6755 = RS232 Interface Module (Programming, etc.)
BLN6825 = Expanded Operator Multiplex Interface (OMI) SMART card - operation is defined by software installed on it.
BLN6832 = CORI (COnsole Remote Interface) (Off-Prem OP)
BLN6845 = Audio Expansion Interface (AEI, required for TOMI)
BLN6872 = Centracom Direct Phone Interface (DPI)
BLN6911 = Display Channel Control Module (5-Button w/ volume pot & digital display & LED's)
BLN7011 = System Timer (current card with SMT LED's for use in Gold Elite systems)
BLN7015 = Turbo TOMI (68020 Based trunked-capable OMI)

The following are courtesy of Bruce1807:

BGN1005 = CEB Card Cage w/o backplane
BLN1147 = Punch Block with Spark Gaps
BLN1148 = Headset Interface Jack
BLN6200 = 6 Outlet AC Power Strip
BLN6665 = Base Interface Module with DC Control & Line Operated Busy Light
BLN6666 = Base Interface Module Tone Control w/ Line Op Busy Light
BLN6725 = AUX II 6In/2Out AUX I/O
QRN4250 = CEB Interface Without Pilot Tone Output
QRN4546 = ROCI Without tones
QRN4547 = CORI Without tones

The following are part numbers and descriptions for CCM panels used in Button & LED consoles. These correspond to the listings in the Centracom Series2 programming software. There may be errors in this list, and as always, it isn't complete. I didn't include any detailed descriptions about the trunking panels as I have no interest or use for them and didn't explore them fully.

Channel Control Modules:

Q2960 = T8/R8 8 Frequency Channel Control Module
B1436 = Auxiliary Control
B1432 = Dual Receive Channel Control Module
B1408-1 = Receive Only Channel Control Module
B1439 = Comparator Display
B1433 = Phone Patch Interface
B1632 = Phone Interface
B1403 = Speaker
B1403-1 = Speaker
B1448 = Call Check Control Module
B1621 = Trunking
B1619 = Trunking
B1620 = Trunking
B1622 = Trunking
B1623 = Trunking
B1665 = Trunking
Q2951 = Trunking
B1655 = Trunking
B1664 = Trunking
B1663 = Trunking
B1662 = Trunking
B1695 = Trunking
B1675 = Trunking
Q3194A = Trunking (CAD Interface)
Q3095A = Mini T1/R1 1CH Channel Control Module (Half Module)
Q3107A = T2/R2 2CH Channel Control Module
Q3108A = T8/R8 8CH Channel Control Module
Q2948 = CAD Interface
Q2949 = CAD Interface
Q2971 = Tone HEAR Control Module
Q2939-1 = Receive Only Module
Q2939-4 = Receive Only Module (Poss. Quad Receive Only)
B1654 = T1/R1 1CH Display Channel Control Module (DCCM)*
B1656 = T2/R2 2CH Display Channel Control Module (DCCM)*
B1657 = T4/R4 4CH Display Channel Control Module (DCCM)*
B1658 = T8/R8 8CH Display Channel Control Module (DCCM)*
B1661A = Receive Only Module

*DCCM's are not compatible with standard OMI cards. May be a Centracom II+ only feature.

Centracom II/II+ Firmware Part Numbers:

5190022H28 = Centracom DPI Firmware (Installs on host BIM)
5190088C06 = WWV BIM Firmware (Installs on host BIM)
5190016C16 = Compact/Dispatcher B&L OP Firmware (Installs on B&L Main Board)
5190002C89 = 16 AUX I/O Firmware (Installs on 16 AUX I/O card)
5190022H24 = System Timer Firmware (For newer Sys. Timer cards)
5191012N62 = U3 TIMI Firmware (Installs on BLN6825 to make TIMI)
5191012N63 = U4 TIMI Firmware (Installs on BLN6825 to make TIMI)
5191012N64 = U5 TIMI Firmware (Installs on BLN6825 to make TIMI)
5191012N65 = U6 TIMI Firmware (Installs on BLN6825 to make TIMI)
5191012L19 = U03 LOMI Firmware (Installs on BLN6825 to make LOMI)
5191012L20 = U04 LOMI Firmware (Installs on BLN6825 to make LOMI)
5191012L21 = U05 LOMI Firmware (Installs on BLN6825 to make LOMI)
5191012L22 = U06 LOMI Firmware (Installs on BLN6825 to make LOMI)
5191012L23 = U07 LOMI Firmware (Installs on BLN6825 to make LOMI)
5191012L24 = U08 LOMI Firmware (Installs on BLN6825 to make LOMI)
5190044C05 = Dual Receive Firmware (Installs on BLN1145)
5191006H93 = BIM Firmware (Installs on BLN6654, 1993 Ver.)
5190044C02 = BIM Firmware (Installs on BLN1144, 1987 Ver.)
5190022H13 = BIM Firmware (Installs on BLN1144, 1989 Ver.)
5190044C14 = MCP Firmware (Installs on rackmount B&L Main Board)
7282090T01 = Replacement digital display module for DCCM's.

More to follow.

Return to “Consoles”

Who is online

Users browsing this forum: No registered users and 1 guest