Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Clear Tx, static Rx

This forum is dedicated to helping people with questions about installing radio equipment in vehicles. This can include antenna installs, electrical wiring questions/problems, and mounting systems. Pictures of installs are welcome.

Note: Discussions regarding lighting, sirens, and other equipment now has its own forum in the 'off-topic' section below.

Moderator: Queue Moderator

arhead@mcfd2.com
New User
Posts: 1
Joined: Fri Mar 08, 2013 4:41 pm

Clear Tx, static Rx

Postby arhead@mcfd2.com » Sun Mar 02, 2014 5:59 pm

My FD received a 2013 Freighliner M2-106 fire engine. The factory installed 2 VHF CDM1550 LS + and I programmed them. Since delivery, we have had a constant issue of being able to transmit to dispatch and be heard well, but all we get in return is static with occasional voices heard in the static. Some days there's nothing at all. I have been trying to figure this out and I am at a loss. I D/C'd all of the accessories (sigtronics, speakers, etc) and tried to do a remote mount with the unit away from the center console with no change. I have ruled out the programming as the issue as well. The antennas are a standard one I buy by the dozen, and I have swapped them with other rigs with no change. I even scratched the paint away on top of the cab to make sure the antenna contacted the body for grounding. The builder used aluminum coax that runs up the B posts to the roof. All of that said, anyone have any ideas? I have never come across this issue before.

User avatar
Bill_G
Posts: 3052
Joined: Thu Sep 17, 2009 5:00 am

Re: Clear Tx, static Rx

Postby Bill_G » Sun Mar 02, 2014 7:50 pm

Call your radio shop. Make sure the rcvrs actually work. And put a wattmeter on the antennas. Both of them might have bad lines or connectors.


Return to “Vehicle Radio Installs”

Who is online

Users browsing this forum: No registered users and 1 guest