2014 Toyota 4Runner

This forum is dedicated to helping people with questions about installing radio equipment in vehicles. This can include antenna installs, electrical wiring questions/problems, and mounting systems. Pictures of installs are welcome.

Note: Discussions regarding lighting, sirens, and other equipment now has its own forum in the 'off-topic' section below.

Moderator: Queue Moderator

Post Reply
Vizwar
Posts: 23
Joined: Tue Apr 15, 2014 1:13 pm

2014 Toyota 4Runner

Post by Vizwar »

I need to install two XTL radios, remote mount 05/M5 heads, in a 2014 Toyota 4Runner.

Has anyone done this in a same or similar model year? I'm mainly looking for some creative inspiration on where to mount the heads. Obstructing cup holds won't be acceptable... A center console change out would be okay but I don't think anyone makes those for the 4Runner.

Thanks
User avatar
giguchan
1 Warning for RSS/CPS Wanted/For Sale/Links
Posts: 518
Joined: Fri Mar 14, 2003 10:36 pm
What radios do you own?: CDM 1550's UHF/VHF HT1550'S

Re: 2014 Toyota 4Runner

Post by giguchan »

no one makes anything for the Runner....(that I have seen) I have an 97 and it just gets worse every year.... I don't like to say it but when it comes time to replace it I will have to go the Chevy Tahoe route... I like to play radio... and sadly there just isn't enough room for any kind of sizeable install. I'm not a Chevy guy.. but I am being forced, I just hope Chevy has their act together.The Tahoe is bigger.. I can pull all my toys and wont even know that they are back there. Most if not all FD, PD, EMS all use the Tahoe's or something similar so getting any radio install question answered will not be a problem. I held out as long as I could.
Best of luck man..
Radios by Fisher-Price? Never!!!
I use /\/\otorola!!
Cheers
73, de'N2GIG
DMR868
New User
Posts: 4
Joined: Wed Oct 15, 2014 10:00 pm

Re: 2014 Toyota 4Runner

Post by DMR868 »

I currently own a Toyota tundra 2012 model. I use a pro clip to attach to the console as well as a RAM mount to hold the control head for a Motorola ATX 7500. I have also used the same amount to hold Control is provided a Motorola XTL 5000 and XT cleaner XTL 2500 at the same. I would be more than happy to send you pictures of my current set up. However I did not have any pictures of my previous set up. The RAM mount was a 1.5 inch ball with a short connector and 3 x 11 ram plate.
User avatar
giguchan
1 Warning for RSS/CPS Wanted/For Sale/Links
Posts: 518
Joined: Fri Mar 14, 2003 10:36 pm
What radios do you own?: CDM 1550's UHF/VHF HT1550'S

Re: 2014 Toyota 4Runner

Post by giguchan »

Hey thanks for the offer.... when you do get the chance I'd love to see your set up
Thanks Gig
Radios by Fisher-Price? Never!!!
I use /\/\otorola!!
Cheers
73, de'N2GIG
User avatar
SteveC0625
Posts: 467
Joined: Sat Jan 01, 2011 9:46 am
What radios do you own?: CDM's, CP's, CM's, and more

Re: 2014 Toyota 4Runner

Post by SteveC0625 »

Vizwar wrote:I need to install two XTL radios, remote mount 05/M5 heads, in a 2014 Toyota 4Runner.

Has anyone done this in a same or similar model year? I'm mainly looking for some creative inspiration on where to mount the heads. Obstructing cup holds won't be acceptable... A center console change out would be okay but I don't think anyone makes those for the 4Runner.

Thanks
Vizwar, I've got no direct experience with Toyotas, but I do a lot of installs on Chevy, Ford, and Dodge cars and trucks. One of the major sources of information and ideas for me on installs is http://www.elightbars.org While the name implies lights and sirens, radios are an essential part of every build and they know their game exceedingly well.

I suggest that you might check with some of those guys and girls over there.

Good luck!
wheelman
Posts: 6
Joined: Sun Dec 19, 2004 7:30 pm

Re: 2014 Toyota 4Runner

Post by wheelman »

Hi,
I have great luck with the "No Holes" style Ram Mount plate in front of the front passenter seat and them using an articulated Ram Mount arm. My typical set up is an Icom control head, Pro-197 digital scanner and Yaesu FT-7800 control head. I have used this same set up in both a 2010 Tundra and in a 2013 4Runner. It is very easy for the driver or passenger to use, allows for easy reconfiguration if necessary, leaves no holes (not that we care about that) and most importantly, keeps the equipment usable and stable, even on extended off road trips. Images here: Image

Image
User avatar
giguchan
1 Warning for RSS/CPS Wanted/For Sale/Links
Posts: 518
Joined: Fri Mar 14, 2003 10:36 pm
What radios do you own?: CDM 1550's UHF/VHF HT1550'S

Re: 2014 Toyota 4Runner

Post by giguchan »

Hey there,
VERY FINE INSTALL!!!! I like it!!! Nice going on this!
Radios by Fisher-Price? Never!!!
I use /\/\otorola!!
Cheers
73, de'N2GIG
Post Reply

Return to “Vehicle Radio Installs”