NTN9176 XTS Vehicle Charger

This forum is dedicated to helping people with questions about installing radio equipment in vehicles. This can include antenna installs, electrical wiring questions/problems, and mounting systems. Pictures of installs are welcome.

Note: Discussions regarding lighting, sirens, and other equipment now has its own forum in the 'off-topic' section below.

Moderator: Queue Moderator

NTN9176 XTS Vehicle Charger

Postby The Comish » Sat May 21, 2005 6:15 pm

Can anyone explain how the "repeater" switch on this unit works. I want to install it in my truck as a vehicle charger. Do I need a repeater for this to work? From the wiring schematic it tooks like the switch activates some type of voltage -/+? Any help on this is appreciated.

Wiring shows:

Red 12V+
Yellow 12V+ Ign
Blk 12V-
White to repeater?
User avatar
The Comish
 
Posts: 111
Joined: Sun Feb 20, 2005 8:31 pm
Location: Nested in the beautiful hills of Idylwild.

Postby Bob » Sat May 21, 2005 6:58 pm

If it's the charger that I'm thinking of, the 'repeater' switch turns on and off a PAC/RT or other repeater or mobile extender when the portable is removed from the charger. With the switch in the on position, the repeater, etc will turn on when the portable is removed. In the off position, it will not. This is, of course, dependent upon the system being wired appropriately.

This will not affect, in any way, the functionality as a charger.
User avatar
Bob
 
Posts: 1006
Joined: Wed Sep 05, 2001 4:00 pm
Location: This spud's for you.

Postby The Comish » Sat May 21, 2005 7:00 pm

Thanks for the explanation...I mainly want it for the charging function which I see it will do.
User avatar
The Comish
 
Posts: 111
Joined: Sun Feb 20, 2005 8:31 pm
Location: Nested in the beautiful hills of Idylwild.


Return to Vehicle Radio Installs

Who is online

Users browsing this forum: No registered users and 8 guests

cron