Power cube for RLN4008B

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
Garyf629
Posts: 169
Joined: Thu Oct 30, 2003 5:45 pm

Power cube for RLN4008B

Post by Garyf629 »

Lost the power cube (wall wart) for my Motorola Rib box. Can anyone supply me the specs? i.e. volts, mah ,tip polarity...

Thanks
Top
User avatar
HLA
Posts: 2334
Joined: Mon Jul 11, 2005 8:15 pm
What radios do you own?: HT1550's, X9000's, CDM1550's

Post by HLA »

9 volts, 500ma would work fine. tip is positive. you do know you can use a 9v battery too right?
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
Top
User avatar
phrawg
Posts: 690
Joined: Sun Sep 09, 2001 4:00 pm

Post by phrawg »

Not necessarily, There are ribs out there that had no provision for
a 9 volt battery. Just a blank opening in the bottom.
BBbzzzzz... ZAP.. GULP !!! ahhhh GOOD fly !
Top
User avatar
Bruce1807
Posts: 1203
Joined: Mon Jan 16, 2006 7:18 am

Post by Bruce1807 »

Blank opening is generally SmartRib
Top
User avatar
jackhackett
Posts: 1518
Joined: Tue Jun 10, 2003 8:52 am

Post by jackhackett »

This is what I've been using, I've been using one for 3 years now, works perfectly and they come with the proper plug for the moto rib already on them.

http://www.mouser.com/search/refine.aspx?Ntt=412-109033
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”