Batboard

I went down hard and i mean HARD today in a foot pursuit, scraped the sh1t outta the front of my HT1K, so I'm gonna recase it (I was pissed) Which p/n do i need to purchase exactly to do so.. without having to resolder and all that stuff?

REX1171A
REX4398A
NTN7151B

Which one?

ty
Vio

check out: http://batboard.batlabs.com/viewtopic.php?t=42291

scroll down to: Refurb/Retrofit Kit's near the bottom

____________________________________________________
HT1000 NON-KEYPAD VHF REFURB KIT - REX1171A
HT1000 DTMF VHF REFURB KIT - REX1172A
2/8/16 CHAN JEDI RETROFIT KIT - REX4398A
JEDI MICROPHONICS KIT - REX4465A
JEDI BACKPLATE/CHASSIS - 1505892U06 formerly REX4575A
PTT Padle replacement kit for remote and public safety microphones - REX4410C

(REX1171A and REX1172A contain: a new front cover, controls flex, front shield, labels, and two conductive pads.)

I know, I feel stupid because I'm the one that compiled that list , but I still don't know which p/n to order if I wanna just replace the front cover/labels/escutcheon and use the same electronics.

If its a non keypad 16 channel REX1171A

Check with ebay user ID: *voyager*
Item no. 5769334912

take a look & see if that fits your bill.......

That looks like just what I'm looking for, also forgot to mention my HT1000 is a 2-Channel UHF B-Model "S" Split. That auction states:

*voyager* ebay auction #[url=http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5769334912]5769334912[/url] wrote:It includes a new outer case/housing, complete with front and top escutcheons (2, 8, or 16 channel), as well as the volume control knob, channel knob (2, 8, or 16 channel), accessory cover, and the PTT button!

So will it work for me?

ty
Vio

He sells it with 2/8/16 channel stickers...
If you need a sticker for the HT-1000
drom me a email

If your buying from V on ebay let him know its a HT-1000
you should be set...

Don't think I have 2 ch. stickers
email ebay user: lone_mountain_communications (used to be: jinxuomeasoda)

The bare front cover plastic is about $12. You'll also need the speaker grille (between $2-3) If the stickers didn't get blemished they'll come off intact if you heat them a bit with a hair dryer or leave them out in the direct sun about an hour, everything else can be scavenged from the old housing and put on the new. The refurb kit is an easier way to go but if you want to save the bucks let me know and I'll get those 2 part #'s.

I think I'll just go with the refurb kit, as long as I don't have to solder.

Both the front Labels (Motorola/HT1000) are in bad shape, scraped pretty deep the M and L are almost invisible and the HT on HT1000 is nearly completely scratched off. The speaker area (below the Motorola label) took the most damage, it's scratched deep.

The picture in the auction that was posted in my other post above has the HT1000/Motorola Label's in the package... plus the front, So I guess I'll be good to go. RadioSouth do you know if there will be any soldering involved if i purchase that item (from *voyager*)?

There is no soldering involved. I've recased quite a few Jedis, and the main thing to be aware of is not to tear the flexs when removing the speaker and front keypad board (if you have one).

Are you looking for brand new? If you don't mind used, I think I have a few laying around here that are in decent shape I can send you (free). I just have the plastic, so you'd have to re-use your electronics but that's really easy to swap out.

Anyone know the part number for the HT1000 DTMF Refurb kit? Not the re-work kit, but the refurb kit, plastic only? New front cover, keypad, stickers and knobs.. No electronics....


-Tony

I'm not sure if they make one.

But if you wanna buy everything seperately...

HT1000 Front Cover, DTMF - NTN7156B
Motorola Label - 3305183R55
HT1000 Label - 3305183R56
16 Channel Top Escutcheon - 1305872U01
Volume Knob - 3605253V01
16 Channel Knob - 3605254V01

OR!... Central150 You're in luck
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 5772527965