HT 1550 PRO 9150 programing

[J_L_COHEN]

hi all

I have a pro9150 (ht1550) I am trying to program the chanels to the radio, i have 37 chs i hould like to have in one zone, but it will only let me put 16 in the zone, i have a cdm1250 with the same 37 chanels in one zone, to put it short i would like the radio to go all the chanels 1-37 with out changing the zones

thanks jeffrey

[elkbow]

Jeffrey,
The PRO9150 looks like the HT1550, but great differences exist between the two, the HT1550 also does trunking, etc.

I have the HT1550 and can easily load 37 channels and more into one zone, each Scan List of course is limited to 16 channels. When in the Zone Assignment screen, select the channels button so you can view what channels are in that zone. Click your Right mouse button within that window and you should have a selection popup saying 'Add at End', click on that and you should have added another channel to your Zone list. It sounds like you may have already done that, so if it doesn't let you add more than 16 channels per Zone it is either the limitation of the PRO9150, the firmware revision in the 9150 or the version of CPS you are using.

Dave

[abbylind]

Dave
Got my VHF HT1550 with the field programmable battery. Nice unit! Good Tx and Rx! Thanks for your tips for programmng. Thinking about getting a UHF one too!

Fowler

[elkbow]

LOL...I need a VHF HT1550, have the UHF. Been looking for a VHF, but haven't found the right price yet.....

[J_L_COHEN]

Hey guys tnankx for the help

[elkbow]

Jeffrey, did you get it to work by doing the 'add at end'?
Dave.

[J_L_COHEN]

Hi Dave,

No it did not work it will only allow 16 ch per zone, I have spent the last two days trying, so I guess i will make it do

thanks for your help
jeffrey