lowband radio question

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
jim
Posts: 2184
Joined: Sun Sep 09, 2001 4:00 pm

Post by jim »

Which radios support both low split and high split? (33 & 46 MHZ)
Chris
Posts: 408
Joined: Wed Sep 05, 2001 4:00 pm

Post by Chris »

I believe the only true wideband low band VHF radio is the Syntor X.
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Post by Will »

I think someone on the for sale board here on BatBoard had one for sale.
Jim202
Posts: 3610
Joined: Sun Sep 09, 2001 4:00 pm

Post by Jim202 »

Only problem with this wide of a range is the antenna system. There isn't an antenna on the market that will do this range. Best thing you can do is to put 2 antennas on the radio with tuned cables on each antenna. Use a T connector at the radio. Had to do this once for a fire department. One frequency was around 33.66 if my memmory is still there. The other was some place around 46.14. It worked with low SWR. Just had to make up the cables to the correct length.

Jim
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Post by Will »

USSPS knows how to do the realy wide band antennas.
There are some antennas from Canada that have a wide bandwith and WORK.
Mike B
Posts: 907
Joined: Thu Sep 20, 2001 4:00 pm

Post by Mike B »

For Ham use, a friend used a commercial antenna duplexer (i.e. one Syntor X radio, one 29 MHz antenna and one 50 Mhz antenna). I think it was a Comet CF-360A 10 meter / 6 meter duplexer. He said it worked great.

Do not forget the other wide bandwidth low band radio, the Syntor X 9000.
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”