XTS3000 using 2 different APCO Protocols or bad Dig Board?
Moderator: Queue Moderator
Hello everyone,
This is a stumbling block and wondering if anyone has any insight..
1 XTS3000 is a model 2 & 1 is a 3.
Both are model #H09UCF9PW7AN.
The system I am attempting to program mine to is an APCO 25 Digital Smartzone system. His radio works fine listening in Type II mode or affiliating using Smartzone. Trying my radio it works in Type II Analog single site trunking and attempting to decode the digital tg's it does scan them, but wont receive audio. When I scan I see the tg's on my display - but he receives it on his.
We tried programing my radio to using Type II Digital in wide area trunking and it did the same, just displays the tg but no digital audio, but receives analog fine.
Even though his radio is Smartzone & mine is Smartnet it should hear digital tg's in a single site programing environment, which his does and another radio does in analog.
My flashcode is 500004-000000-5
version 07.00.01.00
DSP N07.03.06
His that works on the system is:
Flashcode 500008-000000-1
version 04.01.02.00
DSP N06.03.01
This is an older system by maybe 2-3 years, so what I hear is there could be 2 different APCO 25 protocols or maybe a bad digital receiver. Have you heard anything or have any suggestions?
Thanks!
This is a stumbling block and wondering if anyone has any insight..
1 XTS3000 is a model 2 & 1 is a 3.
Both are model #H09UCF9PW7AN.
The system I am attempting to program mine to is an APCO 25 Digital Smartzone system. His radio works fine listening in Type II mode or affiliating using Smartzone. Trying my radio it works in Type II Analog single site trunking and attempting to decode the digital tg's it does scan them, but wont receive audio. When I scan I see the tg's on my display - but he receives it on his.
We tried programing my radio to using Type II Digital in wide area trunking and it did the same, just displays the tg but no digital audio, but receives analog fine.
Even though his radio is Smartzone & mine is Smartnet it should hear digital tg's in a single site programing environment, which his does and another radio does in analog.
My flashcode is 500004-000000-5
version 07.00.01.00
DSP N07.03.06
His that works on the system is:
Flashcode 500008-000000-1
version 04.01.02.00
DSP N06.03.01
This is an older system by maybe 2-3 years, so what I hear is there could be 2 different APCO 25 protocols or maybe a bad digital receiver. Have you heard anything or have any suggestions?
Thanks!
Have you selected "digital" for the "tx voice/signal type" in the talkgroup screen in the trunking personalities? Also, what individual ID are you using? There are certain blocks of digital ID's in an APCO-25 trunking system, using an analog ID won't work. You can send me your codeplug & I'll see if anything else jumps out at me.
Todd
Todd
- spectragod
- Posts: 2029
- Joined: Sun Dec 30, 2001 4:00 pm
- What radios do you own?: FPP 6 meter XTL 5K's
Hello,
That is the other thing we thought, is they might be in compatable but then looking at his flashcode and mine they are both apco 25 imbe. But the digital setting are really messed up on this system, so it has to be a matter of duplicating them to my radio.
The system should sound like a digital cell phone, with the clarity and being able to distinguish voices easily - but the system has an echo with most voices sounding the same.
Will let everyone know what happens nextime we try and program again.
Thanks!!
That is the other thing we thought, is they might be in compatable but then looking at his flashcode and mine they are both apco 25 imbe. But the digital setting are really messed up on this system, so it has to be a matter of duplicating them to my radio.
The system should sound like a digital cell phone, with the clarity and being able to distinguish voices easily - but the system has an echo with most voices sounding the same.
Will let everyone know what happens nextime we try and program again.
Thanks!!