XTS 3k III Umute Problem

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

Post Reply
mtr12222
Posts: 90
Joined: Tue Aug 26, 2003 2:31 pm

XTS 3k III Umute Problem

Post by mtr12222 »

This is an odd one...

XTS 3k III VHF is not unmuting for radio traffic on frequency unless the radio has just been keyed. This occurs on both a repeaterized frequency and its direct pair. The radio hits the repeater and I get a squelch tail and can hear traffic that occurs about 3 seconds after my dekey but then the radio goes deaf. If I use the monitor button the traffic is received. The recieve PL is correct. Any ideas, I can't really firgure this one out.
Top
User avatar
Pj
Moderator
Posts: 5147
Joined: Sun Sep 09, 2001 4:00 pm
What radios do you own?: X9000 thru APX

Post by Pj »

You squelch level may be too high. Look under the personality screens, and bring the level down
Lowband radio. The original and non-complicated wide area interoperable communications system
Image
Top
wb4bsd
Batboard $upporter
Posts: 255
Joined: Fri Mar 14, 2003 10:07 am
What radios do you own?: XTS5000v, XTS3000v, XTS2500

Post by wb4bsd »

i know this post is old, but i had the same problem on my xts3000 M3 i just got. Turns out, that when i turned the MDC for each personality i was having problems with, it unmuted properly. Why this happened i do not know, but i would like to know so i can turn MDC back on since we use it at work to our Security Guards if the hit the EMER button.
Rusty
(I no longer have nextel. I now have an iPhone)
Top
Post Reply

Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”