AS-3 / MDC ID #'s

HayesCrestReact · Post by **HayesCrestReact** » Thu Oct 28, 2004 7:29 pm

Will my AS-3 display MDC ID #'s?

KG6EAQ · Post by **KG6EAQ** » Thu Oct 28, 2004 7:46 pm

Yes. Unless they're using MDC Preamble you'll see it after the TX.

Radiogeek97 · Post by **Radiogeek97** » Fri Oct 29, 2004 4:13 am

Another thing to consider is the flashcode; you will have to have the h14 (digital id display) option. Double check the flash on your radio and make sure, that is the first place to start.

good luck

Dale Earnhardt · Post by **Dale Earnhardt** » Fri Oct 29, 2004 11:39 pm

if you have the right flash, then go into the RSS and go to Radio wide option then to Display, then I think its under PTT ID, make sure options are turn on, somtimes its not on, and it wont show.

Also, make sure the channel u want to decode MDC, make suure in that personality of that channel that MDC is pick for signalling. and that should do the trick if I remember, its been awhile since I program, and its late right now, ughh...... just thought i throw a quick answer in

MRFLASHPORT · Post by **MRFLASHPORT** » Wed Nov 03, 2004 7:26 am

HayesCrestReact,

Make sure you don't enable MDC OR MODAT on the react frequency. The Crusties might get upset with you.

There are a number of people who program your radio, Send me a PM.