Part# for the PL Decode Card for MSR2000 Dual Reciver

TXCAP · Post by **TXCAP** » Thu Oct 28, 2004 2:05 pm

Anyone have the Part# for the PL Decode Card for MSR2000 Dual Rec. Base. Does It Use Vibrasponders? If so I already have them

Mike

Post by **xmo** » Thu Oct 28, 2004 3:39 pm

If the station has two receivers it has the fully optionable backplane. There are three horizontal card slots above the verticle control cards and below the receivers and exciter. One of those is the R1 audio squelch, one is the R1 PL decoder & transmit PL encoder, the third slot contains the R2 audio squelch.

The R2 audio squelch contains its own PL decoder. There are three card versions: TRN9690 CSQ / TRN9691 PL / TRN9692 DPL.

You will find these in the 'Control and Audio' manual: 6881061E40

TXCAP · Post by **TXCAP** » Fri Oct 29, 2004 5:22 am

OK great thank you...
Mike