Desktrac programming

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
HellBoU
Posts: 1
Joined: Fri Jan 21, 2005 1:20 pm

Desktrac programming

Post by HellBoU »

Is that true that we need exclusivly a "cpu 286 pc" to program this type of repeater?
Top
User avatar
wavetar
Administrator
Posts: 7341
Joined: Sun Sep 09, 2001 4:00 pm

Post by wavetar »

Heck no. It would work fine enough, but if you use the latest RSS version available, it should run on much faster machines according to the 486/Pentium Compatibility Matrix documented by Motorola. Here's some info on the latest RSS:

Desk Trac Conventional RVN-4079G May-95 Yes, as of R03.04.00 (released
5/95)
DeskTrac Trunked RVN-4093F May-95 Yes, as of R03.04.00 (released
5/95)

Just remember, always use a real DOS mode, not a DOS Window.

Todd
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.

Welcome to the /\/\achine.
Top
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Post by Will »

You can also use the Maxtrac RSS, setting the selector switch in the Desktrac for the correct radio chassis.
Top
allplowedout
Registered User
Posts: 245
Joined: Sat Nov 20, 2004 6:15 am

the selector switch in the Desktrac

Post by allplowedout »

Anyone have a copy of desktrac rss manual?

Preferably PDF?? Will pay, swap or give thanks & praise for it.
:lol:
Top
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”