xts5000 programming

x22 · Post by **x22** » Sun Jun 12, 2005 4:15 am

Hi,
I trying reading from xts5000. but cps error code (Radio Failed to
Acknowledge Error Code = e4000386)
I checked modem diagnostic(ATI1 - Motorola System Release 6.0 Radio
ATI2 - Host Version: R02.20.02
ATI3 - DSP Version: R02.20.00
ATI4 - Motorola CGISS) and direct connection was sucsses(ConnMotXTSCOM2)
What happen?
CPS R02.01.00 via RS232C-Com2

Post by Pj » Sun Jun 12, 2005 4:32 am

Is the radio serial number 123abc4567 or something like that?

x22 · Post by **x22** » Sun Jun 12, 2005 6:06 am

Pj wrote:Is the radio serial number 123abc4567 or something like that?

Hi, Pj
I don't know serial number (none serial number label)

RESCUE161 · Post by **RESCUE161** » Sun Jun 12, 2005 7:54 am

You're using an old version of CPS, that's for sure. Latest is R05.02.00.

Hit the side button 5 times after turning the radio on and it'll give you the serial number along with lots of other numbers that are extremely helpfull.

Jason · Post by **Jason** » Sun Jun 12, 2005 5:21 pm

I dunno, but those dsp and host versions are the same as most of the abc123 radios.

x22 · Post by **x22** » Sun Jun 12, 2005 7:36 pm

RESCUE161 wrote:You're using an old version of CPS, that's for sure. Latest is R05.02.00.

Hit the side button 5 times after turning the radio on and it'll give you the serial number along with lots of other numbers that are extremely helpfull.

My XTS is XTS5000R model-1

RocketNJ · Post by **RocketNJ** » Mon Jun 13, 2005 2:56 am

If that is one of the "alpha" radios then the older retail software will not read it. Upgrade your CPS. Some people here stated the new CPS is capable of reading/writing to the "alpha" radios.

George

hamptonbeach · Post by **hamptonbeach** » Mon Jun 13, 2005 7:46 pm

[quote="RESCUE161"]You're using an old version of CPS, that's for sure. Latest is R05.02.00.
quote]

I'll agree - CPS version prior to 4 can't read the "alpha" codeplugs

Hightower · Post by **Hightower** » Thu Jun 16, 2005 1:21 am

I must be behind the times.... When approx. was R05.02.00 released?

hamptonbeach · Post by **hamptonbeach** » Thu Jun 16, 2005 1:29 am

April 5th - the only change was support for the PR1500

mike m · Post by **mike m** » Thu Jun 16, 2005 7:19 am

strange my CPS, R05.00.00, supports the PR1500, Mt1500. When was the PR1500 added ? I haven't loaded new CPS since March or April and I'm programmingXTS5000 radios that came in 3 weeks ago with R05.00.00

RESCUE161 · Post by **RESCUE161** » Thu Jun 16, 2005 7:27 am

MOL says that R05.02.00 is for dealers only...

hamptonbeach · Post by **hamptonbeach** » Thu Jun 16, 2005 7:32 am

I don't know - I only went by the comments in my MOL account:

This CPS is for dealers only supporting PR1500 radios - ASTRO 25 Portable CPS Version: R05.02.00

It's a run-on sentence. I don't know if they mean that this CPS is "for dealers only", or the CPS is "only supporting PR1500 radios" ??

ALthough M would like to think that anyone with the CPS is a dealer, and a new version supporting only one model seems dumb ......
I suppose someone that's actually installed it can comment.

RESCUE161 · Post by **RESCUE161** » Thu Jun 16, 2005 7:34 am

I installed it, but now when I pull up my MOL account, it's not available...???

Only version R05.00.00.

hamptonbeach · Post by **hamptonbeach** » Thu Jun 16, 2005 7:40 am

sorry - still there for me

RESCUE161 · Post by **RESCUE161** » Thu Jun 16, 2005 7:46 am

No big deal as I won't be programming any PR1500 radios anyway. As long as I get what I paid for, I'm happy.