XTS3000 to show MDC info on screen?

Hightower · Post by **Hightower** » Sat Jul 30, 2005 12:09 pm

My AS3 shows the MDC info on screen, but I can't figure out how to program the XTS to show MDC-1200 ID data on screen. What am I doing wrong?

Does the XTS 3K show MDC alias? I know the AS3 sure the heck didn't

Thanks guys

sglass · Post by **sglass** » Sat Jul 30, 2005 12:44 pm

Hightower wrote:My AS3 shows the MDC info on screen, but I can't figure out how to program the XTS to show MDC-1200 ID data on screen. What am I doing wrong?

Does the XTS 3K show MDC alias? I know the AS3 sure the heck didn't

Thanks guys

are you flashed for it?

you enable it in the same place in the software as your astro saber

never messed with aliasing, but they willd o soft ID if flashed for it

create change view

f3 radio wide buttons, switches, display, scan, phone
f6 display options
f7 ptt id
id display- enabled

tvsjr · Post by **tvsjr** » Sat Jul 30, 2005 1:00 pm

Neither the XTS3000 nor the Astro Saber support ID aliasing for MDC1200. They'll show you the unit ID (if Digital ID Display is enabled in the flashcode), but not tie it back to a name through the call lists.

Both will support, if enabled in the flashcode, Soft ID, which, on ASTRO digital transmissions *only* allows you to send an 8-character alphanumeric ID to the receiving unit.

Hightower · Post by **Hightower** » Sat Jul 30, 2005 1:17 pm

Thanks guys. It's been over a year since I programmed the AS3. How fast I forget, but you have to admit there are gobs more options in the Astro CPS vs. a HT1250 or HT1000.

Thanks again

You guys are great

BFD319 · Post by **BFD319** » Fri Sep 16, 2005 9:52 am

I have a XTS3000 model 2 It does not read any ideas how do I go about upgradeing the radio to do this?

Post by Pj » Fri Sep 16, 2005 2:07 pm

You need to have option H14 - Display ID in the radio. If you don't, you can purchase it from a MSS. I think the flashupgrade costs around $70. This is something that is usually done at the shop and will take a few days for the shop to get. Its not an "off the shelf" kind of thing.

If you have Astro software, read your radio. Under "Display options" if it has the Display ID or PTT ID box in there their that's not greyed out, you already have it.

BFD319 · Post by **BFD319** » Fri Sep 16, 2005 4:26 pm

Thanks for the help. I don't believe I have that option in the radio. Under displays I have talkgroup-- display on ptt, and display on recieve

BFD319 · Post by **BFD319** » Fri Sep 16, 2005 4:30 pm

Forgot to add, to upgrade the software is that an actual adding of a part or just a program has to be downloaded to the radio? And if so just a program something someone might have to send me I can load in the radio thanks

XTS3000 to show MDC info on screen?

XTS3000 to show MDC info on screen?

Re: XTS3000 to show MDC info on screen?