MTX8250 RSS Squelch adjustment

fallspolice · Post by **fallspolice** » Wed Dec 14, 2005 10:02 am

Does anyone know how to change the squelch in conventional mode so I don't hear the static while my radio is in scan mode? Also I see the channels flipping through on the display screen. I am used to the jedi radios where the display shows you are in scan but dosen't flip through all the channels on the screen.

Thanks

MTS2000des · Post by **MTS2000des** » Wed Dec 14, 2005 12:51 pm

to adjust the actual squelch softpots, you need the Professional Radio Tuner CPS which is a seperate product from the CPS itself.

as far as the channels scrolling, never seen that on any of my Pro series radios but then I again I never owned an 8250 or 9250.

RKG · Post by **RKG** » Wed Dec 14, 2005 1:46 pm

I think the problems are related. The Tuner comes on the same CD as the RSS, though it is a standalone application.

fallspolice · Post by **fallspolice** » Wed Dec 14, 2005 2:14 pm

I have the RSS opened. Where would I find this on the RSS?

Thanks for your help,
Dave

thebigphish · Post by **thebigphish** » Wed Dec 14, 2005 3:03 pm

i thought it was independant to the program???? Look under the start menu where the CPS was installed, it should be another program listed there...

John · Post by **John** » Wed Dec 14, 2005 4:38 pm

None of my 8250s have the channel numbers scroll when scanning. I expect it is because your squelch is open or very loose.

John

fallspolice · Post by **fallspolice** » Wed Dec 14, 2005 5:11 pm

I can't seem to find anything else on the disc about a tuner. Does anyone have more details about this.
Thanks

Post by **wavetar** » Thu Dec 15, 2005 9:10 am

Put the disc in & restart the installation program. Before it does much of anything, it should give you the choice of installing the CPS, or the tuner, or both. Just choose tuner & you should be good to go.

Todd