EEPROM ATMEL AT49LV001NT-70TI

bram380 · Post by **bram380** » Sat Jan 14, 2006 10:32 pm

Hi all,
Need info shop which sell EEPROM AT49LV001NT-70TI.
Thank you

kc7gr · Post by **kc7gr** » Sat Jan 14, 2006 11:52 pm

bram380 wrote:Hi all,
Need info shop which sell EEPROM AT49LV001NT-70TI.
Thank you

The fastest part I've found through regular distribution channels is the -90TI. DigiKey has loads of them.

No one seems to be carrying the -70's. If you absolutely, positively need that fast a chip, you may have better luck getting samples through Atmel

http://www.atmel.com/forms/Samples.asp?family_id=624

Failing that, just search for the part number AT49LV001NT-90TI at http://www.digikey.com. Lots of hits.

Happy hunting.

bram380 · Post by **bram380** » Sun Jan 15, 2006 10:16 pm

I downloaded brosure from http://www.atmel.com
At DigiKey min order 312pcs for AT49LV001NT-90TI.
I need only 25 pcs for it.
Do you have stock?

NB2E · Post by **NB2E** » Mon Jan 16, 2006 9:33 am

Mouser shows them as non-stock, backordered. You can call them or e-mail them and find out what their lead time would be and how long it would take them to get to you. It allowed me to place only 25 in my cart, so there's no minimum order.

Mouser Part Number 556-AT49LV001NT-12JI
70ns Atmel PLCC-32 128K x 8 (1M bit) $5.37/Each or $4.58 if you buy 25

NB2E, Ric

kc7gr · Post by **kc7gr** » Mon Jan 16, 2006 8:12 pm

bram380 wrote:I downloaded brosure from http://www.atmel.com
At DigiKey min order 312pcs for AT49LV001NT-90TI.
I need only 25 pcs for it.
Do you have stock?

Sorry, I'm not a stocking distributor. Sounds like your best bet may be either Mouser or contacting Atmel for a sample or three.

Happy hunting.

smile@2006 · Post by **smile@2006** » Wed May 31, 2006 4:42 am

Can AT49LV001NT-70TI replace with AT49BV001-55TI?

kc7gr · Post by **kc7gr** » Wed May 31, 2006 7:26 am

smile@2006 wrote:Can AT49LV001NT-70TI replace with AT49BV001-55TI?

I don't see why not. The -55 is a faster part. Assuming your circuit was working with a -90 or -70, I don't see any reason why it would fail with a part capable of higher speed.

Rule of Thumb: Where memory (PROM, EPROM, EEPROM) devices are concerned, you can almost always replace a slower part with one rated for higher speed, and not have any problems.

Happy tweaking.

smile@2006 · Post by **smile@2006** » Fri Jun 16, 2006 8:09 am

I use AT49BV001-55TI to replace AT49LV001NT-70TI for gp328/gp338/gp308 (Asia region) still no power up.
Before replace it, i read all data from AT49LV001NT-70TI,
then write to AT49BV001-55TI.
Use EasyPro 80B to read & write flash room.

EEPROM ATMEL AT49LV001NT-70TI

EEPROM ATMEL AT49LV001NT-70TI

Re: EEPROM ATMEL AT49LV001NT-70TI