HELP! Astro Saber III set to inhibit, reads "Fail 01/82

EDACSMAN · Post by **EDACSMAN** » Thu Feb 02, 2006 1:25 pm

During a radio write the radio was powered down. Now it tells me that the radio was set to inhibit by dispatch (not possible). It says to set it back it needs to be done by dispatch or a depot tool.

Can anyone help me.

As of right now I have a $900 Paper weight!

Thanks.

jmr061 · Post by **jmr061** » Thu Feb 02, 2006 1:40 pm

I sent you a pm on this. Hopefully you have a dos codeplug or s-record of the radio to push back in. Fail 1/82 means a corrupt codeplug error.

Jason

ems26m10 · Post by **ems26m10** » Tue Jun 13, 2006 8:54 am

Well The same thing happened to me.

To dog pulled out the power to the rib while I was programming it.

Can anyone help me?

I can read the flash stuff using cps.

My codeplug is from R03.0.0 CPS.

K8TEK · Post by **K8TEK** » Tue Jun 13, 2006 12:18 pm

Do you have an S-Record you could write into it? S-Records are a lifesaver (even if it was inhibited)