A few XTS3000 Q's

[PhillyPhoto]

A few questions for the masters...

I'm dealing with an XTS3000, and have run into some problems. I have the "B" position on the ABC switch set to Scan List Prgm, but when I go into it, I can't delete or select any channels. I also put "PROG" in the menu options, but with the same result, so you can't change the scan list on-the-fly.

Also, I have "CHAN" selected for a menu option, but it shows "SUB" on the radio, it works like the "CHAN", but I'm wondering why it says SUB.

Lastly, I know in the help it says 98, XP etc. you can't have a CPS password, and to use a windows password, but if someone takes your computer and reads the harddrive, or reads the radio itself, there's no password , so I was wondering if there was a way to enable this option anyway?

Thanks for any help you can offer.

[akardam]

I'm dealing with an XTS3000, and have run into some problems. I have the "B" position on the ABC switch set to Scan List Prgm, but when I go into it, I can't delete or select any channels. I also put "PROG" in the menu options, but with the same result, so you can't change the scan list on-the-fly. :x

Is the scanlist that you're trying to edit set for Operator Select, or is it Fixed only?

Also, I have "CHAN" selected for a menu option, but it shows "SUB" on the radio, it works like the "CHAN", but I'm wondering why it says SUB.

Radio Configuration > Display & Menu > Advanced > Uncheck Display Sys/Sub

[PhillyPhoto]

The scanlist is Operator Select now! And I changed the Sys/Sub. Thanks

On a side note, is there anyway to use the call lists to display who's talking, not just when they call?

[Josh]

no

[PhillyPhoto]

Anyone know anything about the CP password?

[MotoTech]

You need to look at the zones/channels make sure the channel or channels you want to set up in scan are scan enabled. also the scan list may be maxed out.

you have the sys/sub selected instead of chan/zone.


and the password is stored in the radio not the computer if that is what you are asking!!!

also by the way, I AM NOT FIXING THAT RADIO AGAIN IF YOU MESS IT UP!!

LOL

[PhillyPhoto]

I know about the radio password, but I was wondering if there's a way to enable the "Application Password" under Tools in the CPS. I got everything else working.