Astro Saber vocon
Moderator: Queue Moderator
-
- Posts: 602
- Joined: Thu Oct 21, 2004 5:55 pm
-
- Posts: 602
- Joined: Thu Oct 21, 2004 5:55 pm
Vocon
The vocon was in a uhf 403-470 I bought it from a PD in ohio it woud transmitt as it should and some times it would receive as it should then all of a sudden it would go dead on receive. the specs are model #HO4RDC9PW5AN, flash is:0000040020002 the rf board is ok, worked with another vocon.
Steve Humphreys
KG4JNQ
KG4JNQ
I have a radio similar to that. It never did receive since I have had it.
I traced the problem to a chip on the vocon.
The vocon has two digital inputs from the rf board. Sort of like the discriminator on an analog radio. One of these data lines was shorted
internal to the chip. So that one will never receive again.
Since yours is intermitant I don't know what to think.
Check the connections on pins 1 and 2 of the vocon/rf board connector.
They are the pins nearest the edge of the board.
Those connections could be bad and the radio will still have transmitt.
I traced the problem to a chip on the vocon.
The vocon has two digital inputs from the rf board. Sort of like the discriminator on an analog radio. One of these data lines was shorted
internal to the chip. So that one will never receive again.
Since yours is intermitant I don't know what to think.
Check the connections on pins 1 and 2 of the vocon/rf board connector.
They are the pins nearest the edge of the board.
Those connections could be bad and the radio will still have transmitt.
-
- Posts: 602
- Joined: Thu Oct 21, 2004 5:55 pm
Astro Saber vocon
I have checked those and they are seated firmly. would you be willing to look at for me? Sreve
Steve Humphreys
KG4JNQ
KG4JNQ