MTS-2000 FAIL 01/93????

BMWFREQ · Post by **BMWFREQ** » Mon Mar 06, 2006 8:04 am

Purchased a MTS-2000 with FAIL 01/93 on the display.

Where do I send my MTS-2000 to have it fixed and programmed? Anyone have the address to the Motorola Service center that I would send this to?

Any idea how much this is going to cost me?

Thanks in advance to all that reply-

tvsjr · Post by **tvsjr** » Mon Mar 06, 2006 8:12 am

Toolproofed.

http://www.batlabs.com/mtsx.html#3

There may be some people who can help you out here, but otherwise, you've got a brick. And Mother M's not very likely to help you out, since it means that someone has molested that radio with LAB tools (proprietary internal-only software). Even if Moto will, it's going to be a flat-rate to the tune of $250-$300.

BMWFREQ · Post by **BMWFREQ** » Mon Mar 06, 2006 9:53 pm

Any idea who I can talk to about possibly getting this up and running again? Maybe there is someone that you can refer me to? Any help would be GREATLY appreciated.

Thanks in advance-

BMW FREQ

tvsjr · Post by **tvsjr** » Mon Mar 06, 2006 10:46 pm

If someone's up to help you, they'll see this an PM you.

Otherwise, write it off and use it for parts.

HLA · Post by **HLA** » Tue Mar 07, 2006 1:22 am

get your money back from whoever you sold it to you.

Andreas · Post by **Andreas** » Tue Mar 07, 2006 4:42 am

If your radio is in the 136- 174 MHz or 403-470MHZ Bandsplit,you can flash it into a MT2100.After this,the radio will work fine and you have 250 channels with select 5 and/or PL.
Look at my homepage for more infos.

Andreas

spectragod · Post by **spectragod** » Tue Mar 07, 2006 5:05 am

I'll buy it for parts.

SG