ASTRO25 CPS 7.00.01 released

Post by Pj » Tue Mar 07, 2006 10:34 am

===============================================
ASTRO 25 Portable CPS R07.00.01
===============================================
Issues fixed in this release:
=============================
- Radio can not be cloned after it is FLASHport refreshed or upgraded
with R07.00.00 CPS.
- 'Non-adjacent Site Search' field was added to correct a customer
reported issue.
New Radios supported (when available):
======================================
-Immersible XTS-2500 (XTS-2500i)
-Model 1 with Display for the XTS-1500 and MT-1500
-Rebanding Models
-B Model Platform
New Radio Features Supported:
=============================
NOTE: Firmware version R07.00.00 required for all features
-Support for 800 MHz rebanding
-DVRS
-GPS Location over ASTRO 25 Trunking Systems
-Configuration of Multiple Conversation mode
-FCC-Compliant FPP on the XTS-2500 and XTS-5000
-UCM Hardware Encryption for the XTS-2500 portable
-ASTRO 25 LE System support
-VRS with Scan

CTAMontrose · Post by **CTAMontrose** » Wed Mar 08, 2006 11:12 am

Mobile is out too:

ASTRO 25 Mobile CPS R07.00.01
============================================

Issues fixed in this release:
=============================

- Radio can not be cloned after it is FLASHport refreshed or upgraded
with R07.00.00 CPS.

- 'Non-adjacent Site Search' field was added to correct a customer
reported issue.

New Radios supported (when available):
======================================

-HPD 1000 High Performance Data Modem

-Rebanding Models

New Radio Features Supported:
=============================
NOTE: Firmware version R07.00.00 required for all features

-Support for 800 MHz Rebanding

-DVRS

-Configuration of Multiple Conversation mode

-ASTRO 25 LE System support

-VRS with Scan

-850 Modes in XTL5000

-512 Modes in XTL2500

-50 Trunking personalities in XTL2500

New CPS features supported:
===========================

- The CPS is now capable of programming and FLASHing the XTL-5000
O5 control head, XTL-2500 control head, and the XTL-1500 control head
via USB through the GCAI connector on the front face. USB FLASHport
requires that the radio has R07.00.00 firmware.

Post by **Mfire39** » Fri Mar 10, 2006 3:56 pm

Is R07.00.01 Available for download on MOL yet?

-Marc

Ranger522 · Post by **Ranger522** » Fri Mar 10, 2006 4:47 pm

Post by **Mfire39** » Fri Mar 10, 2006 5:11 pm

Interesting... It's not showing up on my MOL. Maybe I'm looking in the wrong place. My Astro25 subscription is pretty new, and R07.00.00 was the first version I got on that particular subscription. I was told by "M" that the initial purchase is on CD, which it was, and then every revision or release after that will be available for download. Is the info I was told by "M" somewhat accurate?

-Marc

MikeOxlong · Post by **MikeOxlong** » Fri Mar 10, 2006 6:43 pm

I purchased the astro25 package about 2 months back and it took a few days for v7 to show up. The CD came about a month later.

7.00.01 is showing up fine on MOL.

Post by **Mfire39** » Fri Mar 10, 2006 7:33 pm

Yeah, I can veiw both 7.00.00 and 7.00.01 for purchase on my MOL, just not for download. When I go under resource center, there is no "software" tab. The "software" tab showed up a few days ago only for about a day then it went away. When it was there, it showed a download for "mag one" series radios, but no Astro25 stuff. Like I said, the "software" tab is not there anymore on my MOL. Very strange.

-Marc

RESCUE161 · Post by **RESCUE161** » Sat Mar 11, 2006 6:16 am

You have to call them. They do that to mine sometimes; Although they do not take away my Software Tab, they do however take away the Astro 25 link. I call them and they put everything back to normal. It's a PITA, but you have to get what you paid for.

Post by **Mfire39** » Sat Mar 11, 2006 7:08 am

I think I'll call them and see what they can do. Thanks for all the info.

-Marc