Replacing XTS3000 Uhf Power Module ?

radio-amateur · Post by **radio-amateur** » Wed Mar 15, 2006 12:17 am

Hello,

It seems that my XTS3000 Power Module is dead.
DC current is low and output power is null. XTS
service manual shows the U104 Hybrid (85Y10) having
7 pins. The board however has a 85Y10 hybrid having
only 4 pins ! Question : Does anybody have experience
using hybrid from a MTS or HT1000 RF Board ?
Would you share the technics being used to de-solder
the PA Module :-)

Thank you for your comments

Cheers.

Post by **akardam** » Wed Mar 15, 2006 6:51 am

Check this thread:

http://batboard.batlabs.com/viewtopic.php?t=52058

radio-amateur · Post by **radio-amateur** » Wed Mar 15, 2006 11:38 pm

Great job akardam !!! Thank you for sharing your experience.

I think though that I will take the big "mama" solder Iron way :-)

Unfortunately, I am not able to source any genuide Motoroal parts. I need to find an alternative way

Anybody knows if a HT1000 or MT/MTS2000 PA would fit a XTS3K ?

73"

Post by **akardam** » Thu Mar 16, 2006 6:25 am

If you have MOL access, just go online and order the module. If not, go do your local Motorola dealer and see if they can order the part for you.

willbartlett · Post by **willbartlett** » Thu Mar 16, 2006 2:33 pm

If you can find the same part # in an HT1000 or Astro Saber board, It'll match.

Good luck, Will