XTS3000 refurb housing question

Post by **Mfire39** » Sat Dec 03, 2005 1:04 pm

Ok this is what I want to know. In reading past posts on this issue about A and B version housings, I'm still a little unsure. Looking at the inside of the housing on my XTS3000 model 3, on the flex ribbon that plugs into the radio, it has printing on it that says "STD 40 Pin". Now, looking at MOL, the refurb that I found for the XTS3000 model 3 states "STD 41 Pin. Is there a 40 pin and a 41 pin? Or are they the same? I pretty much just want to know what the basic difference is in the XTS3000 model 3 flex ribbon for the A and B versions, and if anyone has part numbers for the different versions of refurb kits. I hope all of this makes sense.

Thanks in advance,

-Marc

cbus · Post by **cbus** » Sat Dec 03, 2005 5:48 pm

the plug on the flex is definatly different

model a = about 2 1/2 cm male plug on the flex

model b - there is a 1 1/2cm plug on the flex

i'm sure somebody has pics

definatly different part numbers

Tango · Post by **Tango** » Sun Dec 04, 2005 10:41 pm

FYI!

Post by **Mfire39** » Mon Dec 05, 2005 7:22 am

Thats just what I was looking for. You hit the nail on the head. Thanks for the pic.

-Marc

Post by **batdude** » Wed Feb 08, 2006 3:29 pm

i got to looking at this pic - and i think the above pic shows the "A" version on the LEFT - and the "B" version on the right.

can anyone confirm?

doug

cbus · Post by **cbus** » Wed Feb 08, 2006 4:27 pm

batdude wrote:i got to looking at this pic - and i think the above pic shows the "A" version on the LEFT - and the "B" version on the right.

can anyone confirm?

doug

the B is on the left and A on the right

I hate everytime i see a A connector as they are useless to me

Post by **batdude** » Wed Feb 08, 2006 4:36 pm

wierd.

my "AN" XTS 3500 uses the "B" series housing connector.

LOL

doug

MikeOxlong · Post by **MikeOxlong** » Wed Feb 08, 2006 5:44 pm

I concur with doug on the xts3500 wierdness.

My AN xts3500 also uses the B series housing connector.

Perhaps the A revision 3500 was introduced during the B revision 3000's run?

cbus · Post by **cbus** » Thu Feb 09, 2006 4:50 am

MikeOxlong wrote:IPerhaps the A revision 3500 was introduced during the B revision 3000's run?

they always use parts from the last model of the radio used.

just like cars, keep the newest revision and use the good bits.

RADIO43 · Post by **RADIO43** » Thu Apr 20, 2006 7:11 am

Group,

Anyone have the part numbers for the complete case and flex assembly for a "B" Style Connector? Thanks in advance.

Radio43

Fuel4300 · Post by **Fuel4300** » Thu Apr 20, 2006 7:36 am

RADIO43 wrote:Group,

Anyone have the part numbers for the complete case and flex assembly for a "B" Style Connector? Thanks in advance.

Radio43

Model 1 Black NTN8751_
Model 2 Black NTN8752_
Model 3 Black NTN8753_

Model 1R Black NTN8650_
Model 2R Black NTN8651_
Model 3R Black NTN8652_

Model 1R Yellow NTN8669_
Model 2R Yellow NTN8670_
Model 3R Yellow NTN8671_

RADIO43 · Post by **RADIO43** » Thu Apr 20, 2006 8:24 am

Thanks Fuel4300....... Radio43

GEMOTO · Post by **GEMOTO** » Thu Apr 20, 2006 9:16 am

From MOL: YIKES!

Code: Select all

 
Item Number.  NTN8753G HSG XTS3000 M3 STD
Unit of Measure: 1 EA    
Est. ship date   Available   List price   Your price  Quantity  Extended price 
20 Apr 2006     Y              402.00      402.00      1             402.00

Post by **batdude** » Thu Apr 20, 2006 11:17 am

that's what happens when radios are discontinued.....

GEMOTO · Post by **GEMOTO** » Thu Apr 20, 2006 3:18 pm

I guess so. Panetr88 had/has them on eBay (Type B Connector) for $50 incl shipping. Picked up an Model 3R. New conditon, not a scratch on it and sealed in plastic.

RADIO43 · Post by **RADIO43** » Fri Apr 21, 2006 8:43 am

I have a bunch with the "A" connectors on them... Anyone want to trade...

XTS3000 refurb housing question

XTS3000 refurb housing question

..

Re: ..

..

..