I am looking at purchasing an XTS3k with the following info. Will it work with a 9600bps P25 system? The seller says that it works on a 3600bps system but is unsure if it will work with a 9600 system.
Model: H09UCF9PW7BN (806-870MHZ 1-3W 255-CHANNEL)
Flash: 1000010000007 (IMBE, P25, Conventional)
R07.08.00
DSPN 08.02.02
Thank you!
XTS 3000 Model II: Will this one do 9600bps?
Moderator: Queue Moderator
-
chipjumper
- Batboard $upporter
- Posts: 629
- Joined: Thu Nov 21, 2002 10:14 pm
- What radios do you own?: XTS5000 for work
XTS 3000 Model II: Will this one do 9600bps?
______________________________
"Let us be thankful for the fools. But for them the rest of us could not succeed." -Twain
"A pint of sweat saves a gallon of blood." -Patton
"Let us be thankful for the fools. But for them the rest of us could not succeed." -Twain
"A pint of sweat saves a gallon of blood." -Patton
-
motorola_otaku
- Posts: 1854
- Joined: Tue Jan 13, 2004 7:03 am
Nope. In fact, that radio won't trunk at all; the flash is for IMBE and conventional only. For 9600 baud, you need the Q361/G361 APCO-25 trunking option.
Hope you're going through the proper channels to get on MSPCS.. your state is one of two places where some guys got popped in a big way for unauthorized radio programming.
Hope you're going through the proper channels to get on MSPCS.. your state is one of two places where some guys got popped in a big way for unauthorized radio programming.
The short answer is No.
Your radio must have firmware version 06.xx.xx in order to support P25 trunking and also must be flashed for it.
Also, your seller isn't being 100% truthful about the 3600 bps trunking either. Your radio firmware is capable of it but the flash does not support it.
As-is, this radio will do P25 conventional only.
-Mike
Your radio must have firmware version 06.xx.xx in order to support P25 trunking and also must be flashed for it.
Also, your seller isn't being 100% truthful about the 3600 bps trunking either. Your radio firmware is capable of it but the flash does not support it.
As-is, this radio will do P25 conventional only.
-Mike
-
chipjumper
- Batboard $upporter
- Posts: 629
- Joined: Thu Nov 21, 2002 10:14 pm
- What radios do you own?: XTS5000 for work
Oh crap - I forgot to post that I found the answer ... after about 40 minutes of searching. Thanks for the replies though. I'll be looking for a 2500 or 5000 now.
______________________________
"Let us be thankful for the fools. But for them the rest of us could not succeed." -Twain
"A pint of sweat saves a gallon of blood." -Patton
"Let us be thankful for the fools. But for them the rest of us could not succeed." -Twain
"A pint of sweat saves a gallon of blood." -Patton
Make sure that they have the trunking FLASH option you are looking for, too - or you could be in the same boat again. You can find XTS-2500 and XTS-5000 radios that are P-25 conventional only...just beware.chipjumper wrote:Oh crap - I forgot to post that I found the answer ... after about 40 minutes of searching. Thanks for the replies though. I'll be looking for a 2500 or 5000 now.
