Need UHF lo AS! codeplug

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

Post Reply
N9LLO
Posts: 788
Joined: Sat Sep 08, 2001 4:00 pm

Need UHF lo AS! codeplug

Post by N9LLO »

Looking for an AS1 UHF lo codeplug for this radio http://batboard.batlabs.com/viewtopic.php?t=57960

Looks like it was an incomplete band change hack as the VCO crossover setting was in the UHF hi range when I got it and it would not TX over 440.

Model H04RDC9PW5AN
Host R5.51.00.00
DSP N06.04.01

I had a codeplug to new when I got it so I did some hacking around with an LAPD codeplug to get is going somewhat but the test freqs are wrong and I would like to have a fresh codeplug of the correct model as a starting point.
I would also like the starting point for the TX and RX crossover freqs if someone has them handy. I guess they should be the same as an RDC version JEDI.

This is my first ASTRO radio so be gentle guys.

Chris
N9LLO
N9LLO
Posts: 788
Joined: Sat Sep 08, 2001 4:00 pm

Post by N9LLO »

At this point I am looking ANY 403-470 IMBE Astro codeplug to play with.
Please email me what you got!

Chris
[email protected]
Post Reply

Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”