Dear all,
When I programme my XTS3000 and I saw that there is a part from the RSS showing "Direct Key-in frequency" (something like that). Is it really can do it? As I saw a XTS5000 which can directly key in frequency likes JT1000.
Thanks!
XTS3000 Key-in function
Moderator: Queue Moderator
When programming a conventional personality into the radio in CPS, there's the possibility to enter 3 frequencies/tones:likimkim wrote:Hello tcsir,
That means If I set my XTS3000 with the Direct Frequency Entry function, I am only can set the Tx and Rx in same frequency but cannot set the repeater frequency? XTS5000 also?
Thanks!!
73'
RX Frequency/Tone (where the radio always listens)
TX Frequency/Tone (where the radio transmits in normal mode)
TA Frequency/Tone (where the radio transmits in talkaround/direct)
USUALLY, the TA Frequency/Tone is the same as the RX Frequency/Tone. Thus, by unchecking the "Direct Frequency Entry" box, the TA frequency is copied from the RX frequency, saving the programmer a few steps when building a plug.