Hi Guys.
I searched, but couldn't find a solid answer to my question.
Just recieved an Astro Saber II.
R 07.02.02
DSP 07.03.10
100008-000000-0
310AYEXXXX
I was told it had a 1-meg board in it, but I'm getting "unknown" in the display insead of the usual 1-meg.
According to Motorola's reference sheet, it was built in March of 1998 and is reband-able.
So the main question is: Is this a 512k radio given that the service menu lists "unknown" as the vocon size?
I've been so naive living in the realm of 3000's and 5000's
Thanks.
-Mike
Astro Saber Question
Moderator: Queue Moderator
-
mikegilbert
- Posts: 657
- Joined: Thu Nov 14, 2002 12:08 am
- What radios do you own?: All of them
..
FYI, a 512k radio *CANNOT* have a DSP higher than 6.xx
so i think it's safe to say you have a 1 meg radio... unless it's hax0r'd up.... which is unlikely... but possible (there are ways to fit DSP 8 into a 512k radio.... just not a good idea as the HOST firmware won't fit in the 512k eeprom)
doug
so i think it's safe to say you have a 1 meg radio... unless it's hax0r'd up.... which is unlikely... but possible (there are ways to fit DSP 8 into a 512k radio.... just not a good idea as the HOST firmware won't fit in the 512k eeprom)
doug
BRAVO MIKE JULIET ALPHA
"You can do whatever you want, there are just consequences..."
IF SOMEONE PM'S YOU - HAVE THE COURTESY TO REPLY.
"You can do whatever you want, there are just consequences..."
IF SOMEONE PM'S YOU - HAVE THE COURTESY TO REPLY.
-
mikegilbert
- Posts: 657
- Joined: Thu Nov 14, 2002 12:08 am
- What radios do you own?: All of them
-
Tom in D.C.
- Posts: 3859
- Joined: Tue Sep 04, 2001 4:00 pm
- What radios do you own?: Progreso soup can with CRT
deleted
Last edited by Tom in D.C. on Wed Jul 12, 2006 5:38 am, edited 1 time in total.
Tom in D.C.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
Re: AS features question...
Huh? The "4" bit in the first nybble is Q806 Digital ID Display. That means the radio will read out the MDC ID on the display. There is no requirement that a display radio have Q806 in the flashcode... indeed, I've seen several XTS3000 Mod 3s that have factory tags which begin with 1 (lacking Digital ID Display). Get the facts straight.Tom in D.C. wrote:If you have an IMBE radio with a display the first digit
of the flashcode should be a 5, not a 1. A 1 means
IMBE with no display and you said your radio is an
AS2, which I assume has a display. So, you have a
conflict between what you think you have and what
the radio thinks it is.
I'd say the radio has likely been flashed in the field for some reason, causing the UNKNWN readout. Regardless, it IS a 1-meg...