convert a as1 to a as2/3

Screwed · Post by **Screwed** » Sun Aug 20, 2006 8:17 am

how hard is it to convert one?

i know need the lcd and case what else does one need?

Rayjk110 · Post by **Rayjk110** » Sun Aug 20, 2006 6:56 pm

You'll also need a Model 2/3 S-Record, which also stores which flashcode options.

You'll usually get a whored flashcode with one. Depends on who you ask.

Fuel4300 · Post by **Fuel4300** » Mon Aug 21, 2006 5:22 am

You need the plastic that lays over the display shield and acts as the keypad. Last time I ordered one it was available on MOL for $11.00 but that was over a year ago. If you don't get it, your new AS2/3 will not have a functional keypad.

-Mike

RESCUE161 · Post by **RESCUE161** » Mon Aug 21, 2006 6:13 am

Fuel4300 wrote:You need the plastic that lays over the display shield and acts as the keypad. Last time I ordered one it was available on MOL for $11.00 but that was over a year ago. If you don't get it, your new AS2/3 will not have a functional keypad.

-Mike

I've only had to order one once. All of the other Model 1's that I converted already had the plastic membrane. Just have to check each radio.

MattSR · Post by **MattSR** » Mon Aug 21, 2006 1:49 pm

Whats the P/N for the membrane?

RESCUE161 · Post by **RESCUE161** » Mon Aug 21, 2006 1:59 pm

MattSR wrote:Whats the P/N for the membrane?

SW KEY OVERLAY - 4005361W01 - $4.04

Post by **escomm** » Mon Aug 21, 2006 2:29 pm

RESCUE161 wrote:
MattSR wrote:Whats the P/N for the membrane?
SW KEY OVERLAY - 4005361W01 - $4.04

Pffft, that's Gov't pricing! List to the general public on these is $4.75

RESCUE161 · Post by **RESCUE161** » Mon Aug 21, 2006 2:49 pm

Ooops, I forget sometimes...lol

Fuel4300 · Post by **Fuel4300** » Tue Aug 22, 2006 6:41 am

RESCUE161 wrote:
Fuel4300 wrote:You need the plastic that lays over the display shield and acts as the keypad. Last time I ordered one it was available on MOL for $11.00 but that was over a year ago. If you don't get it, your new AS2/3 will not have a functional keypad.

-Mike
I've only had to order one once. All of the other Model 1's that I converted already had the plastic membrane. Just have to check each radio.

I guess I just haven't been that lucky...

-Mike

Post by **escomm** » Tue Aug 22, 2006 8:09 am

RESCUE161 wrote:Ooops, I forget sometimes...lol

Must be the fumes from your new car...