MTX8000 CODEPLUG ISSUE

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
emtprt
Posts: 128
Joined: Mon May 24, 2004 4:52 am
What radios do you own?: Astro Specta CDMS XTS3000

MTX8000 CODEPLUG ISSUE

Post by emtprt »

I picked up a used MTX8000 model H01UCCGDBAN which alows type II trunking and 16 coventional channels with out MDC.

I was able to get a code-plug from a H01RDD9PW1BN code-plug to work in the radio. The problem is the newer code-plug looks for a display and is designed for a 160 channel radio.

I would like to find a code-plug for a 16 Conv. Channel radio that allows MDC and scan to work.

Any suggestions or ideas would be a great help

Thanks

Mark
Top
bellersley
No Longer Registered
Posts: 872
Joined: Tue Feb 22, 2005 7:03 am

Post by bellersley »

You messed up your model number! I assume you mean you have a B3 radio (no display). If you want, email me your existing codeplug and it shall be MDC'ified. [email protected]
Top
User avatar
RESCUE161
Batboard $upporter
Posts: 2062
Joined: Wed Jan 16, 2002 4:00 pm
What radios do you own?: Too many!

Post by RESCUE161 »

Am I reading this right? You took a UHF codeplug and blew it into an 800 MHz radio and it worked?

I'm confused.
Scott
KE4FHH
Religion: Kills folks dead!
Top
emtprt
Posts: 128
Joined: Mon May 24, 2004 4:52 am
What radios do you own?: Astro Specta CDMS XTS3000

Transcription error

Post by emtprt »

I accidently copied the wrong number when I wrote the post. Sorry for the confusion
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”