AS RSS Computer speed?

[dfc2]

Can anyone tell me the best speed laptop to use for the Astro Saber RSS?


having problems with mine, can't read it. I tried seval versions ( 6 and 7 point something) of the RSS.

DFC2

[jmr061]

There is no speed issue with the astro saber/spectra rss. I run mine on a PIII 900MHZ centrino computer. Thats old RSS you are using. TOO NEW CODEPLUG error by chance?

Jason

[dfc2]

No, not the codeplug issue. Just will not read. I tried it on 2 computers, older P1 and a P2, neither worked, different versions of rss. I have in the past, althought I did not this time, use the same computer, and rib for the HT600 and a maxtrac and had no problem.

No clue.

DFC2

[bellersley]

I've used Astro RSS 9.05 on a 486, P1, P3 and my P4, all with no problems what so ever.

[wavetar]

Sounds like it simply isn't connecting. Are you using a "regular" Saber cable, perhaps? The Astro Saber cable has a couple of pins swapped around compared to the regular.

[dfc2]

ok, I got it solved....sort of..... It was a bad cable between the rib and computer.... go figure......


Now I got the too new for rss warning. any way of telling which version was used to progran if you can't read the radio? the only versions I have are the 6 series.

thanks to all who tried to help.


DFC2

[jmr061]

Version 6 RSS is WAY OLD!!!. No you can't tell what was last used to program it. Your best bet it to get the latest version of CPS which is 5 something.

Jason