ht1250 mdc decode alias problem
Moderator: Queue Moderator
ht1250 mdc decode alias problem
Hi I’m dealing with a ht1250 full keypad radio version R02.00.03 I have created a long list of mdc id’s under the call list tap in the rss I have also enabled the display decode id option in the mdc system, but when it decodes a id it only shows the Id number and not the preprogrammed alias, can anybody tell me what option I forgot to enable or the radio is simply getting older an forget to do thinks right.
-
HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
a firmware update will cure your problem. yours is 2.00.03, current is over 5.00 and that was an issue with that older firmware. you probablly have QCII issues too with that.
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS