AS3 for Railroad Monitoring

NSPD · Post by **NSPD** » Mon Nov 20, 2006 9:34 pm

I'm planning to add a few Railroad channels to my new AS3...

Anyone that uses an AS for these purposes know what the best squelch fine-tune setting is?

bellersley · Post by **bellersley** » Mon Nov 20, 2006 9:44 pm

I just use the default setting, whatever that is. It works fine for most everything, I've not run into a problem what so ever.

tvsjr · Post by **tvsjr** » Mon Nov 20, 2006 10:48 pm

For my radios, the squelch opens around 1. So, it usually gets set to 2. It all depends on the radio and alignment... program some CSQ channels to each level and play around with it.

NSPD · Post by **NSPD** » Sun Nov 26, 2006 10:44 am

Thanks for the info guys!

Hightower · Post by **Hightower** » Mon Nov 27, 2006 10:05 pm

Unless I run into problems, I set the squelch to 1 for all channels with PL/DPL. If the channels is carrier squelch, then I opt for a squelch of 2.

Cheers