Programming the Pro 2150 with PL

Chrome69 · Post by **Chrome69** » Sat Dec 02, 2006 10:20 am

I got my hands on the Pro 2150 and trying to put in some Ham repeater frequencies and a few have PL and i have tried they code and it doesn't work.. for example for 103.5 PL i have put in the Motorola code of 014 but it still doesn't work any suggestions? Yes anything else i have programmed in has worked fine just the PL...

Anyone know of any mods for this radio maybe to expand the range?

Brian

HLA · Post by **HLA** » Sat Dec 02, 2006 12:46 pm

the tpl code for 103.5 is 1A. 014 would be a dpl but it's not a motorola dpl. the lowest motorola dpl is 023. unless you meant 114? change your squelch type to tpl and just put 1A in the code box under it.

Chrome69 · Post by **Chrome69** » Fri Dec 15, 2006 5:37 pm

i still can't get it to work would that be programmed while programming the actually bank? Sorry the manual is very limited on doing this...

Rayjk110 · Post by **Rayjk110** » Fri Dec 15, 2006 5:43 pm

Most scanners don't do the Motorola " PL " codes; you just have to enter the PL as it is.

HLA · Post by **HLA** » Fri Dec 15, 2006 10:30 pm

are you talking about some scanner or a motorola pro2150?

Chrome69 · Post by **Chrome69** » Sat Dec 16, 2006 2:45 pm

the Motorola Pro 2150, if i was talking about a RS scanner i would have posted it on radio Reference, not here...

I can't find where to ajust the Squelch Type and the manual is very limited on what things are..

yes you are correct type error 114

It wont take the 103.5 for a PL and again i can't get it to do 1A