CM300 Programming Cable

firecomm · Post by **firecomm** » Wed Feb 21, 2007 10:07 pm

Before anyone says "do a search" I have. I've seen the posts from wavetar and all the rest. All I would like a simple, straight forward pic of the programming cable for the CM300.

Maybe someone can take a pic of their home brew cable that they have made, that works well, and can post it fpr me to see.

The thing I'd like to know is about the RJ45 plug to DB25 connections.

When the RJ45 tab is facing down and it is plugged into the radio, which is pin 1 and which is pin 8, and which wire from the RJ45 goes to the DB25?

I don't need to know about the maxtrac cable and how to modify that. I want to build a new one.

SO...... Thanks and I'm looking forward to all help given.

HLA · Post by **HLA** » Wed Feb 21, 2007 10:11 pm

i make and sell theese if you are interested? they even have the switch to be able to boot and flash the radios. and it will work with all the cdm radios and anything a maxtrac cable will do. email me if interested $25 shipped to you.

Vercomm · Post by **Vercomm** » Fri Feb 23, 2007 2:47 am

I'll try and post tomorrow, just getting off the road from a couple callouts.

firecomm · Post by **firecomm** » Fri Feb 23, 2007 3:24 am

Thanks Jamie, at least some people will help.

You can send the info to my work email if you want.