?? XTS 3000 and "real" P25/9600bps systems.....

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

Post Reply
User avatar
batdude
Personal aide to Mr. Cook
Posts: 2741
Joined: Thu Oct 04, 2001 4:00 pm

?? XTS 3000 and "real" P25/9600bps systems.....

Post by batdude »

is anyone out there familiar with this?


i was "told" that 7.71 rebanding host would function on radios flashed for 9600bps...


this is NOT the case.... FAIL 002 upon channel change.



anyone?
BRAVO MIKE JULIET ALPHA
"You can do whatever you want, there are just consequences..."
IF SOMEONE PM'S YOU - HAVE THE COURTESY TO REPLY.
Top
User avatar
Josh
Posts: 1931
Joined: Mon Sep 03, 2001 4:00 pm
What radios do you own?: APX4K, XTL5K, NX5200, NX700HK

Re: ?? XTS 3000 and "real" P25/9600bps systems...

Post by Josh »

batdude wrote:is anyone out there familiar with this?


i was "told" that 7.71 rebanding host would function on radios flashed for 9600bps...


this is NOT the case.... FAIL 002 upon channel change.



anyone?
Fail 002, now that's a new one by me. Whenever I tried it with non 9600 trunking firmware radio, I got FAIL-001. I guess I should now check out what FAIL 002 means

-Josh
Top
User avatar
Pj
Moderator
Posts: 5147
Joined: Sun Sep 09, 2001 4:00 pm
What radios do you own?: X9000 thru APX

Post by Pj »

Basic Service Manual wrote:FAIL 001 Synthesizer Out-of-Lock a. Reprogram codeplug
b. Send radio to depot

FAIL 002 Selected Mode/Zone Codeplug Checksum
Error
Reprogram codeplug
Lowband radio. The original and non-complicated wide area interoperable communications system
Image
Top
User avatar
Josh
Posts: 1931
Joined: Mon Sep 03, 2001 4:00 pm
What radios do you own?: APX4K, XTL5K, NX5200, NX700HK

Post by Josh »

Pj wrote:
Basic Service Manual wrote:FAIL 001 Synthesizer Out-of-Lock a. Reprogram codeplug
b. Send radio to depot

FAIL 002 Selected Mode/Zone Codeplug Checksum
Error
Reprogram codeplug
unfortunately, fail 001 and 002 have the same solution of "reprogramming the codeplug".

I guess it's not 9600 capable, eh... or did you try reprogramming the codeplug/using a different S-Rec?

-Josh
Top
RailroadTech
Posts: 26
Joined: Fri Sep 01, 2006 4:07 am

Post by RailroadTech »

The latest 5.x Firmware I seen is R06.71.00 2Meg VOCON board I wonder what is with that ?? I thought the only VOCON board for the XTS3000 is I Meg.

R07.71.00 supports Astro 3600 Baud only.
Top
User avatar
batdude
Personal aide to Mr. Cook
Posts: 2741
Joined: Thu Oct 04, 2001 4:00 pm

...

Post by batdude »

2 meg controller?


part number ?
BRAVO MIKE JULIET ALPHA
"You can do whatever you want, there are just consequences..."
IF SOMEONE PM'S YOU - HAVE THE COURTESY TO REPLY.
Top
RailroadTech
Posts: 26
Joined: Fri Sep 01, 2006 4:07 am

Post by RailroadTech »

Just wishfull thinking I guess only one meg vocon boards, but I believe the firmware is correct.
Top
Post Reply

Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”