A4 spectra hig hpower scan list question

[ke7joi]

Gentlemen
I have An A4 VHF spectra I know how to program items into the scan list but I don`t know how to delete channels from the scan list help

[jmr061]

Well its been awhile since I played with an A4 so I may be wrong here but the "SEL" button toggles you through the non-pri, 2nd pri, pri and not in the list at all during the program sequence (also depends on how the rss is setup for user programmable scan). The A4 has no DEL button if I remember correctly as well so no nuisance delete, dont recall if you can program a button as DEL or not.

Jason

[JAYMZ]

If you are programming the scan on the fly the SEL button is all you need. SEL will scroll through Scan, 2nd Pri, 1st Pri, No Scan. I don't remember the exact LED configurations are but I think an amber light will tell you it's in the scan list, flashing red is 2nd Pri, and solid red is 1st Pri.

[ke7joi]

thank you gentle men that is just what I needed to know the only thing that is a little off. Is that a4 head has the PRI and NON PRI in the the display no red or yellow leds just the floresent desplay when you press the scan a button an arrow appears bellow the scan button the when you hold it down it flashes and the words sel mode show in the desplay then you have to turn the mode knob to the channel you want to scan then press the sel button to set the scan mode to primary non primary or no scan. to exit scan mode setup press home

[Pj]

The x9 heads use the busy/tx light.. I had to relearn that the other day when I put x7 heads in