xts3000 issue

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

Post Reply
ben0512
New User
Posts: 9
Joined: Sun Jul 15, 2007 2:52 pm

xts3000 issue

Post by ben0512 »

I just bought a used xts3000r model 2 (ebay) and have a problem. When the radio is powered on, the green led lights up, the top row of symbols (batt indicator etc) and self-test appear, then the top row disappers followed by the self test- then nothing happens- no display, no audible noise when any buttons pressed etc. Can anyone help

In this helps- the model is H09SDF9PW7BN
SERIAL- 326AZY****
FLASHCODE- 1000080000000

it has all tags on, etc- appears to be legit. Please help!!
Batwings21
Posts: 930
Joined: Fri Jun 23, 2006 11:21 am

Re: xts3000 issue

Post by Batwings21 »

I think they may mean the radio is inhibited. But I'm sure someone will correct me if I'm wrong.
ben0512
New User
Posts: 9
Joined: Sun Jul 15, 2007 2:52 pm

Re: xts3000 issue

Post by ben0512 »

Ah ha- after searching the forums about inhibited radios, it appears you are correct. If I was able to clone it with a different, but working xts3000r, would this uninhibit it?
User avatar
N4DES
was KS4VT
Posts: 1234
Joined: Thu Dec 25, 2003 7:59 am
What radios do you own?: APX,XTS2500,XTL2500,XTL1500

Re: xts3000 issue

Post by N4DES »

Maybe yes and maybe no. It depends on what the last version of software was used to program it.
If it was a recent (last 2 years) version of CPS that won't do it. If it was programmed with an earlier version you have
yourself a maybe.
ben0512
New User
Posts: 9
Joined: Sun Jul 15, 2007 2:52 pm

Re: xts3000 issue

Post by ben0512 »

Thanks for the helpful replies. Hopefully the maybe can turn into a yes in the next few days. If I were to clone it, would it have to be with a radio programmed the same as the inhibited one, or can it be any working xts3000?
User avatar
xmo
Moderator
Posts: 2549
Joined: Fri Oct 12, 2001 4:00 pm

Re: xts3000 issue

Post by xmo »

Radios get inhibited for a reason, usually that they are stolen.

Do yourself a favor, call your local law enforcement agency and have them check out your serial number.
ben0512
New User
Posts: 9
Joined: Sun Jul 15, 2007 2:52 pm

Re: xts3000 issue

Post by ben0512 »

This is a very good possibility, it has engravings on the side which lead me to believe it once belonged to a fire department. Does anyone here have the ability to check a serial number if I were to PM the number?
User avatar
txshooter
Posts: 881
Joined: Mon Apr 15, 2002 7:15 am

Re: xts3000 issue

Post by txshooter »

I would suggest if you have any belief it is stolen you personally should contact your local law enforement agency. They can check the serial number for you and you can go from there. One of the hazzards of buying online.......

XMO has already suggested that you personally call your local LE agency. That is what you need to do. If someone here had the ability and ran the number for you it would raise alot of questions as to why they were running it and where it was if it comes back stolen.
Scott B.
"Never argue with seven men when you are carrying a six shooter..."
ben0512
New User
Posts: 9
Joined: Sun Jul 15, 2007 2:52 pm

Re: xts3000 issue

Post by ben0512 »

10-4 Thanks!!
Post Reply

Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”