Centracom Users - ELO Touch Screen Issue

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
User avatar
Wile E. Coyote
Posts: 210
Joined: Thu Oct 28, 2004 9:27 am
What radios do you own?: The best that low bid can buy.

Centracom Users - ELO Touch Screen Issue

Post by Wile E. Coyote »

Recently found this important touch screen issue. A quick search did not show that this was discussed here before:

Symptom
When transmitting using any TX button on a monitor using ELO touch screen drivers, the radio will de-key after 10 seconds

Overview
By default, the 4.40 Universal driver generates an untouch after 10 seconds of constant touch. The untouch time-out can be changed by modifying a registry key as explained below.

IntelliTouch controllers have a built-in two minute untouch time-out. This time-out will override any registry time-out value if the registry value exceeds 120 seconds (120000 milliseconds).


To Change the Time-Out Time

visit this site for Registry Key change instructions.

http://www.elotouch.com/Support/Technic ... imeout.asp

WEC 8)
"The bitterness of poor quality lingers longer than the sweetness of low cost"
RFguy
Posts: 1357
Joined: Wed Dec 21, 2005 6:17 am

Re: Centracom Users - ELO Touch Screen Issue

Post by RFguy »

Thanks for the post. We found this on a Zetron 4000 series install.
I forget the fix that we found, but may have been the same detail that you have provided.
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”