Question XTS3k INTERNAL RF connector

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

Post Reply
kk6rq
Posts: 94
Joined: Thu Apr 01, 2004 1:56 am
What radios do you own?: My wife is calling; go away...

Question XTS3k INTERNAL RF connector

Post by kk6rq »

I need to swap RF sections between two XTS3000s. Anybody know if/how the INTERNAL RF connector
disconnects from the RF board? (the brass thingy with the other side of the wire going to the inside bottom of the
antenna connector.) Specifically, is it a plug or do I need to desolder the antenna end?
Top
Batwings21
Posts: 930
Joined: Fri Jun 23, 2006 11:21 am

Re: Question XTS3k INTERNAL RF connector

Post by Batwings21 »

Check batdudes guide to astros out, it should help. And it is a connector, not sure which way it snaps though.
Top
kk6rq
Posts: 94
Joined: Thu Apr 01, 2004 1:56 am
What radios do you own?: My wife is calling; go away...

Re: Question XTS3k INTERNAL RF connector

Post by kk6rq »

If you mean the pdf for installing the encryption board, its nice, but not mentioned that I saw.
Top
kk6rq
Posts: 94
Joined: Thu Apr 01, 2004 1:56 am
What radios do you own?: My wife is calling; go away...

Re: Question XTS3k INTERNAL RF connector

Post by kk6rq »

OOPS, Sorry! I rechecked it and it IS mentioned. Hemostats to the rescue. THANKS!
Top
Post Reply

Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”