Wanted: XTS3000 P25 S-Recs
Moderator: Queue Moderator
-
PhillyPhoto
- was LuiePL
- Posts: 661
- Joined: Thu Oct 14, 2004 8:09 am
- What radios do you own?: XTS5000, APX2000
Wanted: XTS3000 P25 S-Recs
I know this might be a stretch for the first one, but I'd like an "S" split UHF s-record with 9600baud/bps flash. It must have IMBE/Smartnet etc. I'd like it to be a model III, but will take a II. Secondly, I'd also like one in 800MHz. Same options as the UHF.
-
PhillyPhoto
- was LuiePL
- Posts: 661
- Joined: Thu Oct 14, 2004 8:09 am
- What radios do you own?: XTS5000, APX2000
Re: Wanted: XTS3000 P25 S-Recs
2nd request. I'll settle for the 800 record for now. Thanks.
Re: Wanted: XTS3000 P25 S-Recs
you need to be aware that there is a VERY specific release of firmware for the 3000 to support 9600bps.
if you don't have that EXACT firmware, it will not work ... the radio will FAIL 001
someone here i'm sure has the exact revision required.
doug
if you don't have that EXACT firmware, it will not work ... the radio will FAIL 001
someone here i'm sure has the exact revision required.
doug
BRAVO MIKE JULIET ALPHA
"You can do whatever you want, there are just consequences..."
IF SOMEONE PM'S YOU - HAVE THE COURTESY TO REPLY.
"You can do whatever you want, there are just consequences..."
IF SOMEONE PM'S YOU - HAVE THE COURTESY TO REPLY.
Re: Wanted: XTS3000 P25 S-Recs
Yep, the firmware is R06 dot something for 9600.
So you'll need a very specific firmware AND s-rec.
So you'll need a very specific firmware AND s-rec.
-
CTAMontrose
- was grem467
- Posts: 1145
- Joined: Mon Jul 21, 2003 12:46 pm
Re: Wanted: XTS3000 P25 S-Recs
Was 9k6 even made available in UHF? the only ones i have ever seen were 800.
Re: Wanted: XTS3000 P25 S-Recs
Any 6.xx release will work. Its not that specific.