GP68 Factory Reset Method How?

chammerbeck · Post by **chammerbeck** » Thu Dec 15, 2005 11:07 am

I found one post doing a search that had to deal with SPM and
pressing low, sig, sql, and scan. This didn't seem to work....
I'm a little stumped on this and my radio has been programmed
with some weird settings I'd like to clear out.

Thanks,
Chris

dbrock411 · Post by **dbrock411** » Thu Dec 15, 2005 3:52 pm

Try the following, it's the reset sequence for the AP73: While in SPM (Special programming mode) hold the PTT button down then push 1 3 5 7 9 in that order.

dbrock411 · Post by **dbrock411** » Thu Dec 15, 2005 3:54 pm

Oops - forgot to add, after pushing the 1 3 5 7 9 in that order, it should prompt you to erase. Confirm the erase by pushing the light/enter button to proceed, pushing any other button or releasing the PTT cancels the entire reset. Hope this helps

chammerbeck · Post by **chammerbeck** » Thu Dec 15, 2005 5:53 pm

That did it!! The other post I had had me pushing other buttons....

Anyway....Thanks a ton!
Merry Christmas!

Chris Hammerbeck

Post by **simonp** » Sat Jan 26, 2008 1:54 pm

i have tried following the AP73 instructions for my GP68 but the screen doesn't blank and accept the 13579 sequence, it just beeps on each press ad nothing happens.

Simon

Post by **simonp** » Mon Jan 28, 2008 3:06 am

sorry, sorted. i had switche ddealer mode off by mistake (press PTT, monitor and sacn while switching on), reset then worked fine and it is happy again!
Simon

GP68 Factory Reset Method How?

GP68 Factory Reset Method How?

Re: GP68 Factory Reset Method How?

Re: GP68 Factory Reset Method How?