hi,
i just received a VHF W9 Astro Spectra and it don't want to open properly. Everything was tested with 3 different astron power supplys. I connect the orange and green wire comming from the remote head to the + on the power supply. The ON/OFF switch on the head is at on, the only thing happen is the radio backlights and option buttons open and 2 seconds after everything close. the display also do the same. What it can be ?
Astro Spectra W9 boot fail
Moderator: Queue Moderator
- The Pager Geek
- Posts: 1250
- Joined: Fri Jun 21, 2002 10:31 pm
- What radios do you own?: Disney FRS
Re: Astro Spectra W9 boot fail
No power to the radio.
Re: Astro Spectra W9 boot fail
Like Will indicated, you need to add the =12 volts to the heavy power cable going to
the radio. Without it, the radio will not power up.
Jim
the radio. Without it, the radio will not power up.
Jim
Will wrote:No power to the radio.
Re: Astro Spectra W9 boot fail
If that were the case I'd expect the head to throw a Fail 01/90. It's obviously got enough of a ground to let some power flow through the head.Will wrote:No power to the radio.
To the OP, do you have another head, another drawer, or another set of cables you might try, as a process of elimination? Might also be helpfull to post the model and other information shown on the radio body.
Re: Astro Spectra W9 boot fail
that was a radio inibit, go back to the man who sold me this and get refunded. Problem solved, thanks !