Assuming I have a radio with the proper split, how difficult is it to move it down to the 10 Meter FM Ham Band ?
Any hardware mods or do I just program it ?
Thanks for any tips.
73, Dick, W1KSZ
Putting MAXTRAC on 10 FM
Moderator: Queue Moderator
-
Jim2121
- Batboard $upporter
- Posts: 881
- Joined: Wed Dec 10, 2003 2:36 pm
- What radios do you own?: A few! Most I sign out!
Re: Putting MAXTRAC on 10 FM
whats the model no.? Or what band is it in now? Jim
Messages can't be intercepted if they aren't sent, can they?
Erwin Rommel
Erwin Rommel
Re: Putting MAXTRAC on 10 FM
Use lab or the shift-trick to program.
Then below 29.6, power and modulation will NOT be adjustable for via RSS.
I put in manual pots for these, and the power one on the front panel and played with the voltage divider network to get ~5-60 watts with the full range on the pot.
No RF mods are needed.
Then below 29.6, power and modulation will NOT be adjustable for via RSS.
I put in manual pots for these, and the power one on the front panel and played with the voltage divider network to get ~5-60 watts with the full range on the pot.
No RF mods are needed.