Dear moderator & all members batlabs
I've got problem radio Spectra Astro XTL1500 FL 01/90.
Could you help me how to fix it and what the problem with this radio.
Thanks for your help.
best regards
m0913
XTL1500 Fail 01-90
Moderator: Queue Moderator
Re: XTL1500 Fail 01-90
The service manual says that this error code is a "general failure". Turn the radio off and back on.
I would make sure that you have the rear power cable connected and that it has + 12 volts on it.
Jim
I would make sure that you have the rear power cable connected and that it has + 12 volts on it.
Jim
m0913 wrote:Dear moderator & all members batlabs
I've got problem radio Spectra Astro XTL1500 FL 01/90.
Could you help me how to fix it and what the problem with this radio.
Thanks for your help.
best regards
m0913
Re: XTL1500 Fail 01-90
I've tried turned the radio on, the display appears " MAINTENANCE MODE LOCAL DEVICE " after FL 01-90.Jim202 wrote:The service manual says that this error code is a "general failure". Turn the radio off and back on.
I would make sure that you have the rear power cable connected and that it has + 12 volts on it.
Jim
m0913 wrote:Dear moderator & all members batlabs
I've got problem radio Spectra Astro XTL1500 FL 01/90.
Could you help me how to fix it and what the problem with this radio.
Thanks for your help.
best regards
m0913
Re: XTL1500 Fail 01-90
in the XTL, this is indicative of the control head not communicating with the radio
doug
doug
BRAVO MIKE JULIET ALPHA
"You can do whatever you want, there are just consequences..."
IF SOMEONE PM'S YOU - HAVE THE COURTESY TO REPLY.
"You can do whatever you want, there are just consequences..."
IF SOMEONE PM'S YOU - HAVE THE COURTESY TO REPLY.
Re: XTL1500 Fail 01-90
You can try and synchronize the control head with the radio by going to the Tools/Synchronize Control Head with Radio from the menu bar and follow the instructions. Make sure your file path to the upgrade points to the correct folder by checking the file path. If it already synced then it will let you know. Hope this helps.
Re: XTL1500 Fail 01-90
If this is a remote mount radio, sub a known good control cable. We have seen several failed cables that appear good until subbed and that problem goes away.
Re: XTL1500 Fail 01-90
Also, dissasembling the control head and front control board of the radio and checking each of the flexes for correct seating is a good idea.
We just upgraded about 50 XTL dash mounts to remotes and maybe 10 of them had control flex issues on the first run.
We just upgraded about 50 XTL dash mounts to remotes and maybe 10 of them had control flex issues on the first run.