XTS 5000 Emergency signal question

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

Post Reply
ems170
Posts: 11
Joined: Sat Sep 23, 2006 5:25 pm

XTS 5000 Emergency signal question

Post by ems170 »

I have 2 questions regarding the XTS 5000 ver 11 firmware.

1. Is there a way to have the emergency signal sent over 2 channels? i.e have the signal treansmitted over fireground, then revert to a repeated ch and resend so dispatch is notified.

2. Can the QC page be set to use non standard times for the tone? The tone I have is 1 sec 1sec vs the standard 1 sec 3 sec.
Top
User avatar
alex
Administrator
Posts: 5762
Joined: Mon Sep 03, 2001 4:00 pm

Re: XTS 5000 Emergency signal question

Post by alex »

Just as a side note - if your running 11.00.00/11.00.00 - make sure you get upgraded. There are a number of bugs in that version of firmware which makes it worth going to .03 or just straight to 12.

-alex
The Radio Information Board: http://www.radioinfoboard.com
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
Top
ems170
Posts: 11
Joined: Sat Sep 23, 2006 5:25 pm

Re: XTS 5000 Emergency signal question

Post by ems170 »

Anyone have any idea.
Top
Post Reply

Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”