Above is a diagram I made in MSPaint.
You put it in Horn and Light mode. When it receives a page it completes the circuit which trips the relays. The audio is then allowed through the relays to the PA, which in turn sends it to each speaker.
XTL5000 Consolette Switched Ground or Voltage
Moderator: Queue Moderator
-
alannerd614
- New User
- Posts: 82
- Joined: Fri Jun 27, 2008 6:46 am
XTL5000 Consolette Switched Ground or Voltage
Ok, so I posted my solution for switched ground on the normal accessory connector for an XTL5000 in my other thread
Above is a diagram I made in MSPaint.
You put it in Horn and Light mode. When it receives a page it completes the circuit which trips the relays. The audio is then allowed through the relays to the PA, which in turn sends it to each speaker.
Above is a diagram I made in MSPaint.
You put it in Horn and Light mode. When it receives a page it completes the circuit which trips the relays. The audio is then allowed through the relays to the PA, which in turn sends it to each speaker.