Replacement for Decibel DB230 vhf yagi

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
Equinox
Posts: 176
Joined: Thu Oct 03, 2002 5:51 pm

Replacement for Decibel DB230 vhf yagi

Post by Equinox »

Apparently Commscope has discontinued the DB230 antenna. Does anyone have a recommendation for a comparable replacement 150-160mhz? Looking for something assembled and tuned at the factory. I'll hang up and listen.
.
.
.
.



If at first you don't succeed,.....then maybe skydiving isn't for you.
User avatar
MSS-Dave
Posts: 770
Joined: Mon Jun 30, 2003 6:02 pm
What radios do you own?: Harris XL200M. XPR7550E, NX300

Re: Replacement for Decibel DB230 vhf yagi

Post by MSS-Dave »

http://www.comprodcom.com/en/antennas/b ... 295-70.pdf

or..

http://www.sinclairtechnologies.com/cat ... SNM-DI.pdf

Had this info on hand. You need to spec the specific bandwidth needed so check the part numbers carefully.

Shame that most of the old Decibel line is going away.

Dave
User avatar
psapengineer
Posts: 175
Joined: Thu Oct 07, 2004 10:00 am

Re: Replacement for Decibel DB230 vhf yagi

Post by psapengineer »

Have you considered a log periodic such as the Scala CL-150/URM ?

Here's their link to Logs and Yagis:

http://www.kathrein-scala.com/vhf-high.htm


Regards, Bob
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”